// ---------- script properties ----------

var include_num = 1;
var bold = 0;

// ---------- sites ----------


var s = new Array();

s[0] = "Home^index.html^Air & Gas Systems is a factory authorized distributor service center Tuthill Vacuum Blower Division (TVBS). specialize positive displacement blowers, vacuum pumps, compressors, custom packages providing quality service and repair. Blowers Purchase, customize, service and repair all positive displacement blower brands with Air & Gas Systems - an authorized Tuthill distributor. promise the toughest and highest rated blowers in the industry. Custom Packages specialize in the engineering, fabrication and installation of standard and custom packages wide variety of industries blower and vacuum applications.Experienced At Air & Gas Systems our engineers, technicians, and mechanics decades of experience in providing solutions oil and gas, petrochemical, power, and environmental industries";
s[1] = "Products^products.html^ Products Air & Gas Systems is an award winning distributor and service provider for positive displacement blowers, vacuum pumps, and related equipment. We also specialize in the engineering, fabrication and installation of standard and custom packages for a wide variety of industries and blower / vacuum applications.Our Product Line Every day we strive to offer custom solutions tailored to your process and application, supported by an unparalleled level of knowledge and experience. Let us help you with your process. Blowers Standard Blower Packages Custom Blower Packages & Vacuum Systems Vacuum Pumps Standard Vacuum Systems Oils & Lubricants";
s[2] = "Blowers^Blowers.html^Positive Displacement Blowers Air & Gas Systems authorized Tuthill blower distributor and blower repair center state of Texas. proud offer clients a wide selection best positive displacement blowers. invite browse inventory to find the blower application, contacttoday discuss your specific needs.Show more about Tuthill Blowers Since 1937, Tuthill Vacuum & Blower Systems (TVBS) designing and manufacturing proven M-D Pneumatics products tsolidly engineered, competitively priced, and produced under stringent ISO 9001 quality standards.blower applications or replacements, Tuthill offers broadest lines of positive displacement blower models vacuum boosters industry. Tuthill custom engineer blowers demanding and unique specifications. Tuthill blowers industry engineering standards Every Tuthill positive displacement blower and vacuum booster tested before shipping and carries a factory warranty.Applications include pneumatic conveying, chemical processing, gas moving, vacuum boosters or exhausting, food processing, waste treatment aeration, elevated pressures, complete package systems Blower Models  Qx™ Blowers next generation high performance, efficiency line saves energy and reduces noise providing long operating life at maximum operating conditions Competitor Blowers Roots-type blowers includes special features found premium blowers.  Interchangeable with Roots Universal RAI® and many Sutorbilt® California Legend™ models. compatible existing OEM dimensions. units dynamically balanced vacuum tested.PD Plus® Blowers established long line of premium, heavy-duty blowers. blowers renowned quality, dependability outstanding performance. units dynamically balanced vacuum tested.Equalizer® Blowers blowers medium duty, compact blowers designed interchange with competitive brands such as RCS®/RAM™ models. units dynamically balanced vacuum tested.M-D Vacuum Boosters low-cost, high-capacity gas volumes at high vacuums (50 Torr to micron range) used conjunction types of vacuum pumps. dynamically balanced vacuum tested.";
s[3] = "Qx Blower^Qx Blower.html^ Qx™ Blowers next generation of blowers Tuthill. Qx high performance, energy efficient blower line reduces noise while providing long operating life at maximum operating conditions.Qx™ Blowers utilize precision helical gears, keyed rotor shafts reducing mechanical noise thus making a quieter blower. Qx™ Blowers utilize larger bearings, bearing life in excess of 200,000 hours is possible (Tuthill Pnuelube Oil).Specifications Features Applications Warranty Documents Performance Flow range 180 - 950 CFM (305 - 1615 m³/h) Pressure range up to 20 PSIG (1.38 bar g) Vacuum range up to 17 Hg (575 mbar g) Material Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft Ductile iron, cast integrally with drive rotor Gears Heat treated alloy steel, helical cut Seals Piston Ring Labyrinth Lubrication Oil splash on gear end, grease on drive end Bearings Gear end Double row ball, both rotors Drive End Cylindrical roller on drive rotor Helical Gearing Timed with hardedened, precision helical gears, keyed rotor shafts (NOT taper fit spur gears as offered manufacturers, which have greater backlash, slip lose timing). Helical gears quieter, reducing mechanical noise.Double Row Ball Bearings increased strength compared single row bearings offered competing brands. feature increases bearing life 50% compared competing brands.Rotors with Integral Shafts Qx™ blowers available two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates risk of shifting end clearances installing or removing drive components.Polished Sealing Surfaces shaft surfaces contact sealing members polished to reduce seal wear and risk of leakage.Individually Tested Every Qx™ blower factory tested assure highest quality. While manufacturers perform only sample testing, distance insure your blower meets rigid ISO 9001 registered quality standards.Pneumatic Conveying Bulk Unloading / Loading Fluidization/Agitation of Dense Powders Air Sparging High-Performance Industrial Applications Wastewater Aeration Compost Aeration Vacuum Cleaning Dust Collection Mobile Vacuum Waste Removal Every Qx Blower™ backed Tuthill Vacuum & Blower Systems limited warranty period 24 months after installation, or 30 months original blower shipment, occurs first Qx Series Product Manual 3200 Qx Specification Sheet 3200 Qx Blower Outline Drawing 3203 Qx Performance Curves 3203 Qx Metric Performance Curves 3205 Qx Performance Curves 3205 Qx Metric Performance Curves 3208 Qx Performance Curves 3208 Qx Metric Performance Curves 4600 Qx Specification Sheet 4600 Qx Blower Outline Drawing 4606 Qx Performance Curves 4606 Qx Metric Performance Curves 4610 Qx Performance Curves 4610 Qx Metric Performance Curves 6000 Qx Specification Sheet 6000 Qx Blower Outline Drawing 6009 Qx 6009 Qx Metric 6015 Qx Metric";
s[4] = "Oil & Lubricants^PneuLube_Oil.html^Oil and lubricants Tuthill Vacuum Blower Systems are specifically blended to tackle toughest rotary blower vacuum applications. special formulation quadruples oil life expectancy as compared to conventional mineral oils, requiring fewer oil changes allowing longer maintenance intervals. PneuLube™ Blower Lubricants Vacuum Oils";
s[5] = "Tuthill Competitor Plus™^Competitor_Plus.html^ COMPETITOR PLUS™ blowers designed to be interchangeable equivalent sizes Roots Universal RAI®, Sutorbilt® California Series B and F, and Legend™ Series L and P blowers. COMPETITOR PLUS models rated up to 15 PSIG discharge pressure or 16 Hg dry vacuum. interchangeability, Competitor Blowers superior features ordinarily found premium blowers stock Competitor Plus 21 Series Specifications Features Applications Compatibility Warranty Documents Performance Flow range 6 - 2300 CFM (10-3900 m3/hr) Pressure range up to 15 PSIG (1.03 bar g) Vacuum up to 16 Hg (540 mbar g) Material Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft Ductile iron, cast integrally drive rotor Gears Heat treated alloy steel, helical cut Seals Lip seals on rotor shafts drive shaft Lubrication Oil splash on gear end, grease on drive Bearings Gear end Double row ball, both rotors Cylindrical roller rotor, Single row ball driven rotor Helical Gearing Timed with hardedened, precision helical gears, keyed to rotor shafts (NOT taper fit spur gears as offered manufacturers, greater backlash, slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared single row bearings offered by competing brands. feature increases bearing life 50% compared competing brands.Rotors with Integral Shafts COMPETITOR PLUS™ blowers two-lobe or tri-lobe variations. tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes heavy contamination.vibration free operation all rotors dynamically balanced. Shafts are integral rotors, prevents loosening time.Positive End Clearances Eliminates risk of shifting end clearances when installing or removing components.Polished Sealing Surfaces shaft surfaces in contact sealing members are polished to reduce seal wear risk of leakage. Individually Tested Every COMPETITOR PLUS™ blower is factory tested to assure highest quality. While some manufacturers perform only sample testing,distance to insure your blower meets our rigid ISO 9001 registered quality standards.Carpet Cleaning Dairy Milking Mosquito Fogging Wastewater Aeration Trenchless Drilling Air Sparging Compost Aeration Dust Collection Vacuum Cleaning The COMPETITOR PLUS™ engineered designed fit right existing process without any modification, lower cost Roots, Sutorbilt, or Gardner Denver. View our price comparison table.URAI Flange NPT lbs Type Atmospheric Air or Process Air without Liquids Present Process Gases OtherAir, or Any Liquid Injected 24 shipment, or 18 months after initial startup date, 18 months shipment, or 12 months after initial startup date, whichever occurs first Price Comparison Table Competitor Plus Manual Competitor Plus Specification Sheet Competitor Plus Specification Sheet (Metric) Model 2002 Performance Curves Model 2004 Performance Curves Models 2002 2004 21B-21T Outline Drawings Models 2002 2004 21L-21R Outline Drawings Model 3002 Performance Curves Model 3003 Performance Curves Model 3003 3-Lobe Performance Curves Model 3006 Performance Curves Model 3006 3-Lobe Performance Curves Models 3002 3003 3006 21B-21T Outline Drawings Models 3002 3003 3006 21L-21R Outline Drawings Model 4002 Performance Curves Model 4005 Performance Curves Model 4005 3-Lobe Performance Curves Model 4007 Performance Curves Model 4007 3-Lobe Performance Curves Models 4002 4005 4007 21B-21T Outline Drawings Models 4002 4005 4007 21L-21R Outline Drawings Model 5003 Performance Curve Model 5006 Performance Curve Model 5006 3-Lobe Performance Curve Model 5009 Performance Curve Model 5009 3-Lobe Performance Curve Models 5003 5006 5009 21B-21T Outline Drawings Models 5003 5006 5009 21L-21R Outline Drawings Model 6005 Performance Curve Model 6008 Performance Curve Model 6015 Performance Curve Models 6005 6008 6015 21B-21T Outline Drawings Model 7006 Performance Curve Model 7011 Performance Curve Model 7018 Performance Curve Models 7007 7011 7015 21L-21R Outline Drawings Models 7007 7011 7018 21B-21T Outline Drawings Models 3003 3006 4005 4007 5006 5009 Competitor Plus 21N Outline Drawings";
s[6] = "Tuthill PD Plus™ Blowers^PD_Plus_Blowers.html^Tuthill PD Plus™ Blowers long line established premium, heavy-duty blowers. These blowers renowned their quality, dependability outstanding performance.units dynamically balanced and vacuum tested.leaving factory. PD Plus™ Air Blowers PD Plus™ Single Envelope Gas Blowers PD Plus™ Double Envelope Gas Blowers Heavy-duty blowers pneumatic conveying, wastewater aeration, general industrial use.industry standard fuel and process gas blowers. industry leader gas blowers. models series leak tested to 10-3 mL/second.";
s[7] = "Tuthill PD Plus™ Blowers^PD_Plus_Air_Blowers.html^Tuthill PD Plus™ Blowers heavy-duty blowers applications pneumatic conveying, wastewater aeration, landfill gas biogas recovery, general industrial use.Model 1200 PD Plus™ Air Blowers Model 3200 PD Plus™ Air Blowers Model 4000 PD Plus™ Air Blowers Nominal flows 9300 CFM (15700m3/h) 370 CFM (630m3/h).680 CFM (1160m3/h) Model 5500 PD Plus™ Air Blowers 7000 9000 2180 CFM (3700m3/h).4300 CFM (7300m3/h). 5300 CFM (9000m3/h)";
s[8] = "Model 1200 PD Plus™ Air Blowers^PD_Plus_Model_1200.html^Model 1200 PD PLUS heavy duty industrial blowers designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g]water injected).19/86 Series (Air Flow)19 (horizontal flow) and 86 (vertical flow) series have wide application in pneumatic conveying, wastewater treatment general process industry high pressure, high volume air required. Seal areas vented atmosphere to relieve process pressure against internal lip seals, provide oil-free air.Specifications Features Applications Warranty Documents Performance Flow range 180 - 9300 CFM (305 - 15700 m³/h) Pressure up to 20 PSIG (1.38 bar g) Vacuum range up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors End Cylindrical roller rotor Seals 19/86 Lip and labyrinth type rotor shafts lip 55/82 Mechanical labyrinth 66/69 55/82 plus mechanical sealing Bearings lubricated integral pressure system including filter oil water heat exchanger gears splash Helical Gearing Timed with hardedened, precision helical gears, keyed rotor shafts (NOT taper fit spur gears offered manufacturers,greater backlash, lose timing). Helical gears quieter,reducing mechanical noise.Double Row Ball Bearings increased strength compared to single row bearings offered by competing brands. feature bearing life much as 50% compared competing brands.Rotors with Integral Shafts Tuthill blowers available in two-lobe or tri-lobe variations.tri-lobe variation offers reduced pulsation lower noise levels.two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral rotors, prevents loosening Positive End Clearances Eliminates risk of shifting end clearances installing removing drive components.Polished Sealing Surfaces shaft surfaces contact members polished reduce seal wear risk of leakage.Individually Tested PD PLUS™ blower factory tested highest quality. perform sample testing,distance to insure blower meets rigid ISO 9001 registered quality standards.Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Mobile Vacuum Waste Removal High Pressure Boosting Every Tuthill blower backed Tuthill Vacuum & Blower Systems limited warranty Atmospheric Air or Process Air Liquids Present Process Gases Other than Air, or Any Liquid Injected 24 months date of shipment, or 18 months initial startup 18 months date shipment, or 12 months after initial startup date, whichever occurs first 1200 Series PD Plus Specification Sheet 1200 Series PD Plus Product Manual 1200 - 19 Blower Outline Drawings 1200 - 86 Blower Outline Drawings 1215 Blower Performance Curves 1224 1230 1236 1248";
s[9] = "Model 3200 PD Plus™ Air Blowers^products.html^ Model 3200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow)series has many applications pneumatic conveying, wastewater treatment,general process industry where high pressure oil-free air is required.Performance Specifications Flow range 85 - 370 CFM (630 m³/h)Pressure up to 15 PSIG (1.03 bar g) Vacuum range up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron Cover Gear Free Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Ductile iron Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors Free Single row ball Seals 17/46 Lip and labyrinth type rotor shafts seal 57/81 Mechanical labyrinth type rotor shafts 64/67 57/81 plus mechanical sealing Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed rotor shafts (NOT taper fit spur gears as offered other manufacturers,greater backlash, slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings increased strength compared to single row bearings offered by competing brands. feature increases bearing life by as much as 50% compared to competing brands.rotors with Integral Shafts    Tuthill blowers two-lobe or tri-lobe variations. tri-lobe variation offers reduced pulsation lower noise levels. two-lobe variation ideal processes with heavy contamination. vibration free operation rotors dynamically balanced. Shafts integral to the rotors,prevents loosening Positive End Clearances Eliminates risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces surfaces contact sealing members polished reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower factory tested assure highest quality. sample testing, distance insure blower meets rigid ISO 9001 registered quality standards.Soil Vapor Extraction Air Sparging Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Supercharging Compressors Mobile Vacuum Waste Removal High-Performance Applications Carpet Cleaning Pressure Boosting Every Tuthill blower backed Tuthill Vacuum & Blower Systems limited warranty Type of Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, Any Liquid Injected 24 months from date of shipment, 18 months initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 3200 PD Plus Specification Sheet 3200 PD Plus Product Manual 3200 - 17T-57T Blower Outline Drawings 3200 - 46-81 Blower Outline Drawings 3202 Blower Performance Curves 3204 Blower Performance Curves 3206 Blower Performance Curves 3206 Blower Performance Curves (Metric) 3210 Blower Performance Curves 3210 Blower Performance Curves Metric)";
s[10] = "Model 4000 PD Plus™ Air Blowers^PD_Plus_Model_4000.html^Model 4000 PD PLUS heavy duty industrial blowers are designed high performance applications, 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow) series wide application in pneumatic conveying, wastewater treatment, general process industry where high pressure oil-free air is required.  Model 4000 PD Plus™ Air Blowers Products Model 4000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow) This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure oil-free air is required.Performance Specifications Flow range 51 - 680 CFM (1160 m³/h) Pressure range up to 18 PSIG (1.03 bar g) Vacuum range up to 17” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft Ductile iron Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors Free end and Drive Shaft Single row ball Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Soil Vapor Extraction Air Sparging Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Supercharging Compressors Mobile Vacuum Waste Removal High-Performance Applications Carpet Cleaning Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 4000 PD Plus Specification Sheet 4000 - 5500 Product Manual 4000 - 17-18-54-57 Blower Outline Drawings 4000 - 46-81 4006 Blower Performance Curves 4009 4009 (Metric) 4009 (Premium) 4012 4012";
s[11] = "Model 5500 PD Plus™ Air Blowers^PD_Plus_Model_5500.html^ Model 5500 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow) This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure oil-free air is required.Performance Specifications Flow range 91 - 2180 CFM (3700 m³/h) Pressure range up to 18 PSIG (1.24 bar g) Vacuum range up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Gear (drive) end Double row ball Free (back) Cylindrical roller Drive Shaft Spherical roller Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Soil Vapor Extraction Air Sparging Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Supercharging Compressors Mobile Vacuum Waste Removal High-Performance Applications Carpet Cleaning Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 5500 PD Plus Specification Sheet 5500 PD Plus Product Manual 5500-64T Blower Outline Drawings 5500-67 Blower Outline Drawings 5507 Blower Performance Curves 5507 (Metric) 5507 (Premium) 5509 5509 5509 5511 5511 5511 5514 5514 5516 5516 5518 5518 5520 5520";
s[12] = " Model 7000 PD Plus™ Air Blowers^PD_Plus_Model_7000.html^Model 7000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow)This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure oil-free air is required.Performance Specifications Flow range 367 - 4300 CFM (7300 m³/h) Pressure range up to 18 PSIG (1.24 bar g) Vacuum range up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Rotors Double row ball Drive Shaft Single row ball Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Mobile Vacuum Waste Removal High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 7000 PD Plus Specification Sheet 7000 MVB Product Manual 7000-17-57-64 Blower Outline Drawings 7000-46-67-81 7010 Blower Performance Curves 7013 7017 7021 7026";
s[13] = "Model 9000 PD Plus™ Air Blowers^PD_Plus_Model_9000.html^Model 9000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).17/46 Series (Air Flow)This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure oil-free air is required.Performance Specifications Flow range 281 - 5300 CFM (9000 m³/h) Pressure up to 15 PSIG (1.24 bar g) Vacuum range: up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Rotor Shafts Double row ball Drive Shaft Spherical roller Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings  For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. ndividually Tested  Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Pulp/Paper Processing Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Mobile Vacuum Waste Removal High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 9000 PD Plus Specification Sheet 9000 PD Plus Product Manual 9000-17-57 Blower Outline Drawings 9000-46-81 Blower Outline Drawings 9000-46G-81G Blower Outline Drawings 9012 9016 9020 9027";
s[14] = "PD Plus™ Single Envelope Gas Blowers ^PD_Plus_Single_Envelope_Blowers.html^ PD Plus™ Single Envelope Gas Blowers Tuthill PD Plus™ Blowers are heavy-duty blowers for their applications in pneumatic conveying, wastewater aeration, and general industrial use. The industry standard for fuel and process gas blowers. Model 1200 PD Plus™ Single Envelope Gas Blowers Model 3200 PD Plus™ Single Envelope Gas Blowers Model 4000 PD Plus™ Single Envelope Gas Blowers Nominal flows to 9300 CFM (15700m3/h). Nominal flows to 370 CFM (630m3/h). Nominal flows to 680 CFM (1160m3/h).Model 5500 PD Plus™ Single Envelope Gas Blowers Model 7000 PD Plus™ Single Envelope Gas Blowers Model 9000 PD Plus™ Single Envelope Gas Blowers Nominal flows to 2180 CFM (3700m3/h). Nominal flows to 4300 CFM (7300m3/h). Nominal flows to 5300 CFM (9000m3/h)";
s[15] = " Model 1200 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_1200_Single_Envelope_Gas_Blower.html^ Model 1200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g]water injected).55/82 Series (Single Envelope Gastight)The 55 (horizontal flow) and 82 (vertical flow) series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications up to 100 PSIG (6.89 bar g) discharge Performance Specifications Flow range 180 - 9300 CFM (305 - 15700 m³/h)Pressure up to 20 PSIG (1.38 bar g)Vacuum range up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors Drive End Cylindrical roller on drive rotor Seals 19/86 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 55/82 Mechanical and labyrinth type on the rotor shafts on the drive shaft 66/69 Same as 55/82 plus mechanical sealing on the drive shaft Lubrication: Bearings are lubricated by an integral pressure system including filter and oil to water heat exchanger; gears are splash lubricated.Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 1200 Series PD Plus Specification Sheet 1200 Series PD Plus Product Manual 1200 - 55 Blower Outline Drawings 1200 - 82 Blower Outline Drawings 1215 Blower Performance Curves 1224 Blower Performance Curves 1230 Blower Performance Curves 1236 Blower Performance Curves 1248 Blower Performance Curves";
s[16] = "Model 3200 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_3200_Single_Envelope_Gas_Blower.html^Model 3200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).57/81Series (Single Envelope Gastight)This series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications to 100 PSIG (6.89 bar g) discharge.Performance Specifications Flow range: 85 - 350 CFM (600 m³/h) Pressure range up to 15 PSIG (1.03 bar g) Vacuum range up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft Ductile iron Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors Free end and Drive Shaft Single row ball Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present  Process Gases Other than Air, or Any Liquid Injected 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 3200 PD Plus Specification Sheet 3200 PD Plus Product Manual 3200 - 17T-57T Blower Outline Drawings 3200 - 46-81 3204 Blower Performance Curves 3206 3206 (Metric) 3210 3210";
s[17] = "Model 4000 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_4000_Single_Envelope_Gas_Blower.html^Model 4000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).57/81 Series (Single Envelope Gastight)This series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications to 100 PSIG (6.89 bar g) discharge.Performance Specifications Flow range 51 - 680 CFM (1160 m³/h)Pressure range up to 18 PSIG (1.03 bar g)Vacuum range up to 17” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft Ductile iron Gears Heat treated alloy steel, helical cut Bearings Gear end Double row ball, both rotors Free end and Drive Shaft Single row ball Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings    For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present  Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 4000 PD Plus Specification Sheet 4000 - 5500 PD Plus Product Manual 4000 - 17-18-54-57 Blower Outline Drawings 4000 - 46-81 Blower Outline Drawings 4006 Blower Performance Curves 4009 Blower Performance Curves 4009 Blowers Performance Curves (Metric) 4009 Blowers Performance Curves (Premium) 4012 Blowers Performance Curves 4012 Blowers Performance Curves (Metric)";
s[18] = "Model 5500 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_5500_Single_Envelope_Gas_Blower.html^Model 5500 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).57/81 Series (Single Envelope Gastight)This series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications to 100 PSIG (6.89 bar g) discharge.Performance Specifications Flow range 91 - 2180 CFM (3700 m³/h)Pressure range up to 18 PSIG (1.24 bar g) Vacuum range up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Gear (drive) end Double row ball Free (back) end Cylindrical roller Drive Shaft Spherical roller Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings  For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 5500 PD Plus Specification Sheet 5500 PD Plus Product Manual 5500-64T Blower Outline Drawings 5500-67 5507 Blower Performance Curves 5507 (Metric) 5507(Premium) 5509 5509 5509 5511 5514 5516 5518 5520";
s[19] = "Model 7000 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_7000_Single_Envelope_Gas_Blower.html^Model 7000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).57/81 Series (Single Envelope Gastight)This series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications to 100 PSIG (6.89 bar g) discharge.Performance Specifications Flow range 367 - 4300 CFM (7300 m³/h)Pressure range up to 18 PSIG (1.24 bar g) Vacuum range: up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected)Material Specifications Housing Cast iron End Plates Cast iron End Cover Cast iron Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Rotors Double row ball Drive Shaft Single row ball Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 7000 PD Plus Specification Sheet 7000 MVB Product Manual 7000-17-57-64 Blower Outline Drawings 7000-46-67-81 Blower Outline Drawings 7010 Blower Performance Curves 7013 Blower Performance Curves 7017 Blower Performance Curves 7021 Blower Performance Curves 7026 Blower Performance Curves";
s[20] = "Model 9000 PD Plus™ Single Envelope Gas Blowers^PD_Plus_Model_9000_Single_Envelope_Gas_Blower.html^Model 9000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).57/81 Series (Single Envelope Gastight)This series is utilized in such applications as closed loop pneumatic conveying, fuel or process gas handling, or elevated pressure applications to 100 PSIG (6.89 bar g) discharge.Performance Specifications Flow range: 281 - 5300 CFM (9000 m³/h) Pressure range up to 15 PSIG (1.24 bar g) Vacuum range up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Housing Cast iron End Plates Cast iron End Cover Gear end Cast iron Free end Aluminum Rotors Ductile iron Shafts Ductile iron, cast integrally with rotors Drive Shaft SAE 4140 forged alloy steel Gears Heat treated alloy steel, helical cut Bearings Rotor Shafts Double row ball Drive Shaft Spherical roller Seals 17/46 Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81 Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67 Same as 57/81 plus mechanical sealing on the drive shaft Lubrication Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 9000 PD Plus Specification Sheet 9000 PD Plus Product Manual 9000 - 17-57 Blower Outline Drawings 9000 - 46-81 Blower Outline Drawings 9000 - 46G-81G Blower Outline Drawings 9012 Blower Performance Curves 9016 9020 9027";
s[21] = "PD Plus™ Double Envelope Gas Blowers^PD_Plus_Double_Envelope_Blowers.html^ Tuthill PD Plus™ Blowers are heavy-duty blowers for their applications in pneumatic conveying, wastewater aeration, and general industrial use. The industry standard for all gas blowers. All blower models in this series are leak tested to 10-3 mL/second.Model 1200 PD Plus™Double Envelope Gas Blowers Model 3200 PD Plus™ Double Envelope Gas Blowers Model 4000 PD Plus™ Double Envelope Gas Blowers Nominal flows to 9300 CFM (15700m3/h).Nominal flows to 370 CFM (630m3/h). Nominal flows to 680 CFM (1160m3/h).Model 5500 PD Plus™ Double Envelope Gas Blowers Model 7000 PD Plus™ Double Envelope Gas Blowers Model 9000 PD Plus™ Double Envelope Gas Blowers Nominal flows to 2180 CFM (3700m3/h). Nominal flows to 4300 CFM (7300m3/h). Nominal flows to 5300 CFM (9000m3/h)";
s[22] = "Model 1200 PD Plus™ Double Envelope Gas Blowers ^PD_Plus_Model_1200_Double_Envelope_Gas_Blower.html^Model 1200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g]water injected).Model 1200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g]water injected).66/69Series (Double Envelope Gastight)The 66 (horizontal flow) and 69 (vertical flow) series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 55/82 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.Performance Specifications Flow range: 180 - 9300 CFM (305 - 115810 m³/h) Pressure range: up to 20 PSIG (1.38 bar g)Vacuum range: up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected)Material Specifications Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut Bearings: Gear end: Double row ball, both rotors Drive End: Cylindrical roller on drive rotor Seals: 19/86: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 55/82: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 66/69: Same as 55/82 plus mechanical sealing on the drive shaft Lubrication: Bearings are lubricated by an integral pressure system including filter and oil to water heat exchanger; gears are splash lubricated.Helical Gearing  Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance  Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 1200 Series PD Plus Specification Sheet Product Manual 1200 - 66 Blower Outline Drawings 1200 - 69 Blower Outline Drawings 1215 Blower Performance Curves 1224 Blower Performance Curves 1230 Blower Performance Curves 1236 Blower Performance Curves 1248 Blower Performance Curves";
s[23] = " Model 3200 PD Plus™ Double Envelope Gas Blowers^PD_Plus_Model_3200_Double_Envelope_Gas_Blower.html^Model 3200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).64/67Series (Double Envelope Gastight)This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 57/81 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.Performance Specifications:Flow range: 85 - 370 CFM (630 m³/h) Pressure range: up to 15 PSIG (1.03 bar g) Vacuum range: up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications: Housing: Cast iron End Plates: Cast iron End Cover: Gear end: Cast iron Free end: Aluminum Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: Ductile iron Gears: Heat treated alloy steel, helical cut Bearings: Gear end: Double row ball, both rotors Free end and Drive Shaft: Single row ball Seals: 17/46: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67: Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.   Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 3200 PD Plus Specification Sheet Product Manual 3200 - 17T-57T Blower Outline Drawings 46-81 Blower Outline Drawings 3202 Blower Performance Curves 3204 3206 (Metric) 3210 3210";
s[24] = "Model 4000 PD Plus™ Double Envelope Gas Blowers^PD_Plus_Model_4000_Double_Envelope_Gas_Blower.html^ Model 4000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).64/67 Series (Double Envelope Gastight)This series is built to laboratory standards where virtually complete sealing is required. In addition to the single envelope (57/81) series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection. Performance Specifications: Flow range: 51 - 680 CFM (1160 m³/h) Pressure range: up to 18 PSIG (1.03 bar g) Vacuum range: up to 17” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications: Housing: Cast iron End Plates: Cast iron End Cover: Gear end: Cast iron Free end: Aluminum Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: Ductile iron Gears: Heat treated alloy steel, helical cut Bearings: Gear end: Double row ball, both rotors Free end and Drive Shaft: Single row ball Seals: 17/46: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67: Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 4000 PD Plus Specification Sheet 5500 PD Plus Product Manual 4000 - 17-18-54-57 Blower Outline Drawings 4000 - 46-81 4006 Blower Performance Curves 4009 (Premium) 4012 (Metric)";
s[25] = "Model 5500 PD Plus™ Double Envelope Gas Blowers^PD_Plus_Model_5500_Double_Envelope_Gas_Blower.html^Model 5500 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).64/67 Series (Double Envelope Gastight)This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 57/81 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection. Performance Specifications:Flow range: 91 - 2180 CFM (3700 m³/h) Pressure range: up to 18 PSIG (1.24 bar g) Vacuum range: up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications: Housing: Cast iron End Plates: Cast iron End Cover: Gear end: Cast iron Free end: Aluminum Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut Bearings: Gear (drive) end: Double row ball Free (back) end: Cylindrical roller Drive Shaft: Spherical roller Seals: 17/46: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67: Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 5500 PD Plus Specification Sheet 5500 PD Plus Product Manual 5500-64T Blower Outline Drawings 5500-67 Blower Outline Drawings 5507 (Metric) (Premium) 5509 5511 5514 5516 5518 5520";
s[26] = "Model 7000 PD Plus™ Double Envelope Gas Blowers^PD_Plus_Model_7000_Double_Envelope_Gas_Blower.html^Model 7000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSIG (1.24 bar g) pressure boost or 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).64/67 Series (Double Envelope Gastight)This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 57/81 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.Performance Specifications:Flow range: 367 - 4300 CFM (7300 m³/h)Pressure range: up to 18 PSIG (1.24 bar g) Vacuum range: up to 17” Hg (-575 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut Bearings:Rotors: Double row ball Drive Shaft: Single row ball Seals: 17/46: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67: Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.   Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance pplications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 7000 PD Plus Specification Sheet MVB Product Manual -17-57-64 Blower Outline Drawings 7000-46-67-81 7010 7013 7017 7021 7026";
s[27] = "Model 9000 PD Plus™ Double Envelope Gas Blowers^PD_Plus_Model_9000_Double_Envelope_Gas_Blower.html^Model 9000 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected).64/67 Series (Double Envelope Gastight)This series is built to laboratory standards where virtually complete sealing is required. In addition to the features shown on the 57/81 series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.Performance Specifications:Flow range: 281 - 5300 CFM (9000 m³/h) Pressure range: up to 15 PSIG (1.24 bar g) Vacuum range: up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Gear end: Cast iron Free end: Aluminum Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut Bearings: Rotor Shafts: Double row ball Drive Shaft: Spherical roller Seals: 17/46: Lip and labyrinth type on the rotor shafts lip seal on the drive shaft 57/81: Mechanical and labyrinth type on the rotor shafts lip seal on the drive shaft 64/67: Same as 57/81 plus mechanical sealing on the drive shaft Lubrication: Oil splash system, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Oil-Free Handling Fuel, Utility or Process Gases Pulp/Paper Processing Laser Recirculation Systems Fluid Bed Combustion Closed Loop Pneumatic Conveying Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 9000 PD Plus Specification Sheet 9000 PD Plus Product Manual 9000 - 17-57 Blower Outline Drawings 9000 - 46-81 Blower Outline Drawings 9000 - 46G-81G Blower Outline Drawings 9012 Blower Performance Curves 9016 Blower Performance Curves 9020 Blower Performance Curves 9027 Blower Performance Curves";
s[28] = "Blower Packages^Blower_Packages.html^Integrating the right positive displacement blower into your application can be a complex process. Fortunately, Air & Gas Systems provides many quality solutions with our Tuthill Blower Packages Line and our Custom Engineered Packages. For most packages, certified engineering drawings are immediately avialable for customer layout and piping design work.Custom Blower Packages M-D Standard Blower Packages PneuPak 13 Blower Packages PneuPak 33 Blower Packages Pneu Max II™ Blower Packages Qube™ Low Noise Blower Packages";
s[29] = "Custom Packages^Custom_Packages.html^Custom Packages";
s[30] = "M-D Standard Blower Packages^Standard_Blower_Packages.html^Engineered with the industry recognized PD Plus™ & Equalizer RM™ blowers, these versatile packages have nearly 250,000 possible configurations.See table below for more information and specifications.Performance Specifications:Flow range: 8 - 4200 CFM (14 - 7100 m³/h) Pressure range: up to 15 PSIG (1.03 bar g) Vacuum range: up to 16 Hg (540 mbar g)Quick availability - as little as two weeks after receipt of order Welded, structural steel base Easy access to service areas Factory assembled & factory warranted Available for PD Plus, AcousticAir or Equalizer blowers Versatile configurations Soil Vapor Extraction Oil-Free Handling Fuel, Utility or Process Gases Fluid Bed Combustion Pneumatic Conveying Fluidization/Agitation of Dense Powders Vapor Recovery Digester Gas Processing Steam Compression High-Performance Applications Pressure Boosting Every Tuthill Blower Package is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application:24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.18 months from date of shipment, or 12 months after initial startup date, whichever occurs first Drawing Blower Models Series CFM (m³/h) HP Flow/ Base Silencers WCEP Ext. Lube 3202, 3204 3200 HV2 3202, 3204 17/57/64 8-100 (14-170) 2-10 horizontal, no legs none no no 3200 VV1 3202, 3204 46/81 8-100 (14-170) 2-10 vertical, no legs none no no 3200 VV1L 3202, 3204 46/81 8-100 (14-170) 2-10 vertical, w/ legs none no no 3200 VV1A 3202, 3204 84/85 8-100 (14-170) 2-10 vertical, w/ legs inlet, discharge no no 3200 VV1A-L 3202, 3204 46E/81E 8-100 (14-170) 2-10 vertical, w/ legs inlet, discharge no yes 3200 VV1A-E 3202, 3204 46E/81E 8-100 (14-170) 2-10 vertical, w/ legs inlet, discharge yes no 3200 VV1A-DS 3202, 3204 46/81 8-100 (14-170) 2-10 vertical, w/ legs discharge no no 3200 VV1A-DSE 3202, 3204 46E/81E 8-100 (14-170) 2-10 vertical, w/ legs discharge yes no 3200 VV1A-ISE 3202, 3204 46E/81E 8-100 (14-170) 2-10 vertical, w/ legs inlet yes no Drawing Blower Models Series CFM (m³/h) HP Flow/ Base Silencers WCEP Ext. Lube 3206, 3210 3200 HV3 3206, 3210 17/57/64 26-300 (44-510) 3-20 horizontal, no legs none no no 3200 VV2 3206, 3210 46/81 26-300 (44-510) 3-25 vertical, no legs none no no 3200 VV2-L 3206, 3210 84/85 26-300 (44-510) 3-25 vertical, no legs none no yes 3200 VV2L-L 3206, 3210 84/85 26-300 (44-510) 3-25 vertical, w/ legs none no yes 3200 VV2L-E 3206, 3210 46E/81E 26-300 (44-510) 3-25 vertical, w/ legs none yes no 3200 VV2A 3206, 3210 46/81 26-300 (44-510) 3-25 vertical, w/ legs inlet, discharge no no 3200 VV2A-L 3206, 3210 84/85 26-300 (44-510) 3-25 vertical, w/ legs inlet, discharge no yes 3200 VV2A-E 3206, 3210 46E/81E 26-300 (44-510) 3-25 vertical, w/ legs inlet, discharge yes no 3200 VV2A-DS 3206, 3210 46/81 26-300 (44-510) 3-25 vertical, w/ legs discharge no no 3200 VV2A-DSL 3206, 3210 84/85 26-300 (44-510) 3-25 vertical, w/ legs discharge no yes 3200 VV2A-DSE 3206, 3210 46E/81E 26-300 (44-510) 3-25 vertical, w/ legs discharge yes no 3200 VV2A-IS 3206, 3210 46/81 26-300 (44-510) 3-25 vertical, w/ legs inlet no no Drawing Blower Models Series CFM (m³/h) HP Flow/ Base Silencers WCEP Ext. Lube 4006, 4009, 4012 4000 HV1 4006, 4009, 4012 17/57 55-600 (95-1020) 5-10 horizontal no legs none no no 4000 VV1 4006, 4009, 4012 46/81 55-600 (95-1020) 5-10 vertical no legs none no no 4000 VV1L 4006, 4009, 4012 46/81 55-600 (95-1020) 5-10 vertical w/ legs none no no 4000 VV1A 4006, 4009, 4012 46/81 55-600 (95-1020) 5-10 vertical w/ legs inlet, discharge no no 4000 VV1A-L 4006, 4009, 4012 84/85 55-600 (95-1020) 5-10 vertical w/ legs inlet, discharge no yes 4000 VV1A-DS 4006, 4009, 4012 46/81 55-600 (95-1020) 5-10 vertical w/ legs discharge no no 4000 VV1A-DSL 4006, 4009, 4012 17/57 55-600 (95-1020) 5-10 vertical w/ legs discharge no yes 4000 VV1A-IS 4006, 4009, 4012 46/81 55-600 (95-1020) 5-10 vertical w/ legs inlet no no Drawing Blower Models Series CFM (m³/h) HP Flow/ Base Silencers WCEP Ext. Lube 4006, 4009, 4012 continued 4000 HV2 4006, 4009, 4012 17/57 55-600 (95-1020) 15-30 horizontal no legs none no no 4000 VV2 4006, 4009, 4012 46/81 55-600 (95-1020) 15-30 vertical no legs none no no 4000 VV2L 4006, 4009, 4012 46/81 55-600 (95-1020) 15-30 vertical w/ legs none no no 4000 VV2L-E 4006, 4009, 4012 46E/81E 55-600 (95-1020) 15-30 vertical w/ legs none yes no 4000 VV2A 4006, 4009, 4012 46/81 55-600 (95-1020) 15-30 vertical w/ legs inlet, discharge no no 4000 VV2A-L 4006, 4009, 4012 84/85 55-600 (95-1020) 15-30 vertical w/ legs inlet, discharge no yes 4000 VV2A-E 4006, 4009, 4012 46E/81E 55-600 (95-1020) 15-30 vertical w/ legs inlet, discharge yes no 4000 VV2A-DS 4006, 4009, 4012 46/81 55-600 (95-1020) 15-30 vertical w/ legs discharge no no 4000 VV2A-IS 4006, 4009, 4012 46/81 55-600 (95-1020) 15-30 vertical w/ legs inlet no no 4000 VV2A-ISE 4006, 4009, 4012 46E/81E 55-600 (95-1020) 15-30 vertical w/ legs inlet yes no Drawing Blower Models Series CFM (m³/h) HP Flow/ Base Silencers WCEP Ext. Lube 4606, 4609, 4612 4600 VV1A 4600 VV2A 5507, 5509, 5511, 5514, 5516 5500 HV1 5500 HV2 5500 VV1 5500 VV1A 5500 VV1A-DS 5500 VV1A-E 5500 VV1L 5500 VV1L-L 5500 VV2 5500 VV2A 5500 VV2A-DSE 5500 VV2A-DS 5500 VV2A-E 5500 VV2A-L 5500 VV2L 5500 VV2L-L 5500 VV3 5500 VV3A 5500 VV3A-DS 5500 VV3A-E 5500 VV3A-IS 5500 VV3L 5500 VV3L-E 5500v VV3L-L 5500 VV4L 5500 VV5L 5500 VV5L-E 5500 VV6L 5500 VV6L-E 7010, 7013, 7017, 7021 7000 VV1A 7000 VV1A-DS 7000 VV1L 7000 VV2 7000 VV2A 7000 VV2A-DS 7000 VV3A";
s[31] = "PneuPak 13 Blower Packages^PneuPak_13_Blower_Packages.html^Engineered with the dependable COMPETITOR PLUS™ rotary positive blower, PneuPak is a dependable and economical low pressure (up to 15 PSIG [1.03 bar g] or 16” Hg [-540 mbar g] vacuum) air source for many industrial and municipal applications such as pneumatic conveying of bulk powder or seed, fluidization/agitation of bulk powders, wastewater aeration, milking of dairy cattle and motive force for vacuum exhausting and cleaning systems See table below for more information and specifications.Flow range: 6 - 1494 CFM (10 - 2540 m³/h) Pressure range: up to 15 PSIG (1.03 bar g)Vacuum range: up to 16 Hg (540 mbar g)Quick availability - as little as one week after receipt of order Mounting base with integral silencer Silencers without acoustic packing for applications where use of fiber packing is not needed or not practical Maintenance friendly Easy access to service areas Factory assembled & factory warranted Versatile configurations Dairy Milking Wastewater Aeration Air Sparging Pneumatic Conveying Compost Aeration Vacuum Cleaning Dust Collection Every Tuthill Blower Package is backed by the Tuthill Vacuum & Blower Systems limited warranty:Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first PneuPak Blower Product Manual: Competitor Series 21 22 23 Field Troubleshooting Manual Specificaiton Sheet 13-20-A Outline Drawings13-20-B 13-20-C 13-25-A 13-25-B 13-25-C 13-30-A 13-30-B 13-30-C 13-40-A 13-40-B 13-40-C 13-50-A 13-50-B 13-50-C 13-60-A 13-60-B 13-60-C";
s[32] = "PneuPak 33 Blower Packages^PneuPak_33_Blower_Packages.html^Engineered with the dependable COMPETITOR PLUS™ rotary positive blower, PneuPak is a dependable and economical low pressure (up to 15 PSIG [1.03 bar g] or 16” Hg [-540 mbar g] vacuum) air source for many industrial and municipal applications such as pneumatic conveying of bulk powder or seed, fluidization/agitation of bulk powders, wastewater aeration, milking of dairy cattle and motive force for vacuum exhausting and cleaning systems Flow range: 6 - 1494 CFM (10 - 2540 m³/h) Pressure range: up to 15 PSIG (1.03 bar g) Vacuum range: up to 16 Hg (540 mbar g)Quick availability - as little as one week after receipt of order Mounting base with integral silencer Silencers without acoustic packing for applications where use of fiber packing is not needed or not practical Maintenance friendly Easy access to service areas Factory assembled & factory warranted Versatile configurations Dairy Milking Wastewater Aeration Air Sparging Pneumatic Conveying Compost Aeration Vacuum Cleaning Dust Collection Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first PneuPak Blower Product Manual: Competitor Series 21 22 23 Field Troubleshooting Manual Specificaiton Sheet 33-20-A Outline Drawings 33-20-B 33-20-C 33-25-A 33-25-B 33-25-C 33-30-A 33-30-B 33-30-C 33-40-A 33-40-B33-40-C 33-50-A 33-50-B 33-50-C 33-60-A 33-60-B 33-60-C";
s[33] = "PneuMax II™ Blower Packages^PneuMaxII_Blower_Packages.html^PneuMax II compact, low-noise rotary blower packages are dependable and economical low pressure (up to 15 PSIG or 16” Hg vacuum) air sources for many industrial and municipal applications such as pneumatic conveying of bulk powder or seed, fluidization/agitation of bulk powders, wastewater aeration, milking of dairy cattle and motive force for vacuum exhausting and cleaning systems, all at 85 dB(A) or less.See table below for more information and specifications.Flow range: 20 - 800 CFM (34 - 1360 m³/h)Pressure range: up to 15 PSIG (1.03 bar g) Vacuum range: up to 16 Hg (540 mbar g)Maintenance friendly noise enclosure with gas supported easy open lid for easy access including: Quiet operation 70-85 (max) dB(A)Cooling fan Instrument panel Split hinged panels that swing open for access (PneuMax II 300 has single, removable front panel) Oil drain/level gauge accessible from front for easy oil change Mounting base includes integral fork truck pockets for easy transportation and positioning Automatic V-belt tensioning with belt replacement indicator Factory assembled and factory warranted including Electric motor Discharge check valve Relief valve Process gauges Optional accessories and controls available Dairy Milking Wastewater Aeration Air Sparging Pneumatic Conveying Compost Aeration Vacuum Cleaning Dust Collection Every Tuthill Blower Package is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first PneuMaxII Specification Sheet PneuMaxII Product Manual PneuMaxII Blower Product Manual: Competitor Series 21 22 23 PneuMaxII 300 Outline Drawings PneuMaxII 800 Outline Drawings";
s[34] = "Qube™ Low Noise Blower Packages^Qube_Blower_Packages.html^Featuring the new Qx blower, Qube™ is the perfect low cost, quick delivery, quiet solution for major industries including pneumatic conveying, wastewater aeration, plastics, cement and more. With OSHA, CE, ATEX compliance, ANSI or DIN connections, and NEMA or IEC motor frames make Qube welcome anywhere in the world.See table below for more information and specifications.Flow range: 85 - 950 CFM (145-1600 m³/h) Pressure range: up to 18 PSIG (1.24 bar g)Vacuum range: up to 17 Hg (575 mbar g)Maintenance friendly noise enclosure with easy access including: Quiet operation 65-75 dB(A) @ 1m Sparkproof composite cooling fan Instrument panel Oil drain/level gauge accessible from front for easy oil change Mounting base includes integral fork truck pockets for easy transportation and positioning Automatic V-belt tensioning with belt replacement indicator Factory assembled and factory warranted including Electric motor Discharge check valve Relief valve Process gauges Optional accessories and controls available Dairy Milking Wastewater Aeration Air Sparging Pneumatic Conveying Compost Aeration Vacuum Cleaning Dust Collection Every Tuthill Blower Package is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first Qube Brochure Qube Product Manual Qube Blower Product Manual: Qx Series Blower Qube 800P Outline Drawings Qube 800V Outline Drawings";
s[35] = "Vacuum Pumps^Vacuum_Pumps.html^Tuthill Vacuum Pumps: Kinney® and AF™ Vacuum Pumps Air & Gas Systems is your authorized Tuthill blower distributor and vacuum pump repair center for the state of Texas. We are proud to offer clients a wide selection of the best positive displacement blowers and vacuum pumps. We invite you to browse our inventory to find the vacuum pumps that's right for your application, or contact us today to discuss your specific needs.Show more about Tuthill Vacuum Pumps From 1907 to 1966, the Kinney Vacuum Pump Company engineered and manufactured revolutionary vacuum pump designs.  In 1996 Tuthill Corporation purchased the Kinney Vacuum Company and in 1999 purchased Atlantic Fluidics.In 2002, these operations were combined with the Tuthill Pneumatics Group, manufacturer of the world-renowned M-D Pneumatics™ rotary blowers and vacuum boosters, to form Tuthill Vacuum and Blower Systems (TVBS), the sole manufacturer of Kinney® and Atlantic Fluidics® brands of vacuum pumps.TVBS now offers the industrys most comprehensive product offering of vacuum pumps on the market.  Including rotary piston pumps, rotary van pumps, liquid ring pumps, dry vacuum pumps, and booster pumping systems with the innovative axial flow liquid ring vacuum pumps. In addition, all pump designs can be incorporated in complete engineered vacuum systems.Applications include industries such as plastics, medicine, chemicals, pharmaceuticals, food packaging and vacuum furnaces where the ruggedness and durability of Kinney Vacuum products and Atlantic Fluidics® are highly valued.AF™ A-Series Liquid Ring Vacuum Pump: AF™ vacuum pumps feature our abuser-friendly Fluid-Vac® axial flow technology, allowing the pump to start in even a flooded condition. These compact vacuum pumps outperform any comparable vacuum pump on the market.AF™ T-Series Liquid Ring Vacuum Pump: AF™ T Series multi-stage liquid ring vacuum pumps utilize the same axial flow design as the A Series single stage pumps with an additional stage to achieve deeper vacuum levels.Kinney® Dry Screw Vacuum Pumps: Kinney® SDV dry screw vacuum pumps operate without oil or water in the pumping chamber, and due to straight-through design, the SDV handles both condensable vapors and some solids without leaving residue.Kinney® KLRC Liquid Ring Vacuum Pumps: Kinney Liquid Ring pumps use a ring of liquid as a sealant, which is ideal for pumping wet gas mixtures. KLRC Series, Atlantic Fluidics Liquid Ring Pumps & Systems.Kinney® Rotary Piston Vacuum Pumps:These pumps are quiet running with minimal vibration and high pumping capacity at both high and low pressures.  The KT pump enjoys unequaled durability as there is no metal to metal contact.Kinney® Rotary Vane Vacuum Pumps: These pumps are used in relatively clean and dry applications such as hospitals, labs, and gas cylinder evacuation - an economical vacuum source for those applications where the process is relatively clean or filtered. Available in single and two stage design.M-D Vacuum Boosters: provide low-cost, high-capacity gas volumes at high vacuums (50 Torr to micron range) and may be used in conjunction with all types of vacuum pumps.  All units are dynamically balanced and vacuum tested";
s[36] = "AF™A Series Liquid Ring Vacuum Pump^A_Series_Liquid_Ring_Vacuum_Pump.html^AF™ single-stage A series vacuum pumps are simplistic in design, rugged in construction and built to run in the most severe of industrial conditions. With no metal-to-metal contact, it is not unusual for these pumps to run in 24/7 operation for years without maintenance.AF™ vacuum pumps feature our abuser-friendly Fluid-Vac® axial flow technology, allowing the pump to start in even a flooded condition. These compact vacuum pumps outperform any comparable vacuum pump on the market. Available in closed coupled configuration. AF™ series vacuum pumps consist of a shrouded motor rotating freely within an eccentric casing. Centrifugal force acting on liquid within the pump causes the liquid to form a ring inside the casing. A fixed port cylinder concentric with the rotor directs the gas into the suction ports.Gas is trapped between the blades by the liquid pistons formed by the centrigual force as the liquid receds from the port cylinder. It is rapped at the point of maximum eccentricity and is then compressed by the liquid ring as it is forced radially inward toward the central port cylinder. After each revolution the compressed gas and accompanying liquid are discharged.During the pumping cycle the gas is in intimate contact with the sealing liquid and compression is nearly isothermal. When handling saturated vapor-gas mixtures the liquid ring acts as a condenser greatly increasing the effective capacity of the pump.Performance Specifications:Single Stage Design Capacity: 5 - 600 CFM (8.5 - 1020 m3/h) Maximum Vacuum: 28.3 Hg (40 Torr) Material Specifications: Casing, Cover, Rotor, Port Cylinder: All Bronze Cast Iron, Bronze Fitted All Stainless Steel (A10 – A20) All Ni-Resist (A20 only) Mechanical Seals: BUNA — Optional Viton™ — Cast Iron Bronze Fitted, All Bronze, Viton™ — Ni Resist, Stainless Steel EPR — Optional Kalrez™ — Optional Optional Material: Alloy 20 Hastelloy™ Drive Options: Pedestal Frame Close-coupled motor Stocked Motors: TEFC – 3Ø TEFC – 1Ø Optional Motors: XP Class I, GpD – 3Ø — Optional XP Class I, GpD – 1Ø — Optional No contact between operating components in the casing Flat power curve over entire vacuum range prevents motor overload Reduced stress on motor shaft and bearingsIncreased water handling capability prevents heat build-up, extends life of mechanical seals Compact, close-coupled design eliminates need for interstage manifold or motor alignment Shrouded rotor increases pumping efficiency for high vacuum and low water consumption Fast delivery on standard materials and local support Manufactured in Springfield, Missouri USA Chemical and Pharmaceutical Processing Soil Vapor Extraction Deaeration Extruders Central Vacuum ystems Filtration Solvent Distillation/Vapor Recovery Sterilization Autoclaves Degasifiers Evaporators The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW A5 10/17 1/0.75 A10 16/27 1.5/1.1 A15 22/37 2/1.5 A20 35/59 3/2.2 A75 80/136 5/3.7 A100 115/195 7.5/5.5 A130 150/255 10/7.5 A200 220/374 15/11 A300 300/510 20/15 A600 625/1062 40/30 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first A5 - A20 Specification Sheet A75 - A130 Specification Sheet A200 - A300 Specification Sheet AF Pump Operation & Maintenance Manual Fluid-Vac® Principle";
s[37] = "AF™T Series Liquid Ring Vacuum Pump^T_Series_Liquid_Ring_Vacuum_Pump.html^AF™ T Series multi-stage liquid ring vacuum pumps utilize the same axial flow design as the A Series single stage pumps with an additional stage to achieve deeper vacuum levels. When packaged in oil sealed systems, T series pumps can operate in dry gas applications to vacuum levels as low as 4 Torr (5.3 mbar a).This patented pump style is designed for high wet vacuum applications where they can operate with the lowest partial gas pressure without cavitation. Ideally suited for evaporators, deaerators, autoclaves, dryers and other applications requiring vacuum higher than 27 Hg. Available in closed coupled motor configuration.AF™ series vacuum pumps consist of a shrouded motor rotating freely within an eccentric casing. Centrifugal force acting on liquid within the pump causes the liquid to form a ring inside the casing. A fixed port cylinder concentric with the rotor directs the gas into the suction ports.Gas is trapped between the blades by the liquid pistons formed by the centrigual force as the liquid receds from the port cylinder. It is rapped at the point of maximum eccentricity and is then compressed by the liquid ring as it is forced radially inward toward the central port cylinder. After each revolution the compressed gas and accompanying liquid are discharged.During the pumping cycle the gas is in intimate contact with the sealing liquid and compression is nearly isothermal. When handling saturated vapor-gas mixtures the liquid ring acts as a condenser greatly increasing the effective capacity of the pump.Performance Specifications:Two Stage Design Capacity: 10 - 100 CFM (17 - 170 m3/h) Maximum Vacuum: 29.3Hg (15 Torr) Material Specifications: Casing, Cover, Rotor, Port Cylinder: All Bronze Cast Iron, Bronze Fitted All Stainless Steel (A10 – A20) All Ni-Resist (A20 only) Mechanical Seals: BUNA — Optional Viton™ — Cast Iron Bronze Fitted, All Bronze, Viton™ — Ni Resist, Stainless Steel EPR — Optional Kalrez™ — Optional Optional Material: Alloy 20 Hastelloy™ Drive Options: Pedestal Frame Close-coupled motor Stocked Motors: TEFC – 3Ø TEFC – 1Ø Optional Motors: XP Class I, GpD – 3Ø — Optional XP Class I, GpD – 1Ø — Optional No contact between operating components in the casing Flat power curve over entire vacuum range prevents motor overload Reduced stress on motor shaft and bearingsIncreased water handling capability prevents heat build-up, extends life of mechanical seals Compact, close-coupled design eliminates need for interstage manifold or motor alignment Shrouded rotor increases pumping efficiency for high vacuum and low water consumption Fast delivery on standard materials and local support Manufactured in Springfield, Missouri USA Chemical and Pharmaceutical Processing Deaeration Extruders Central Vacuum Systems Filtration Solvent Distillation/Vapor Recovery Sterilization Autoclaves Degasifiers Evaporators The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW T0505 10/17 2/1.5 T1505 20/34 3/2.2 T2010 30/51 5/3.7 T7530 75/127 7.5/5.5 T10030 100/170 10/7.5 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first AF Pump Operation & Maintenance Manual Series Product Data Sheet";
s[38] = "Kinney® Dry Screw Vacuum Pumps^Dry_Screw_Vacuum_Pumps.html^Kinney® SDV dry screw vacuum pumps operate without oil or water in the pumping chamber, and due to straight-through design, the SDV handles both condensable vapors and some solids without leaving residue. There is no metal-to-metal contact inside the pumping chamber, so wear is minimized. Kinney SDV dry screw pumps are water-cooled, but self-contained air-cooled coolant recirculation systems are available.SDV pumps are variable-pitch, to increase efficiency, and lower temperatures. SDV pumps are also capable of full pumping speed from atmospheric pressure to 1 Torr (1.3 mbar a); however, the SDV can achieve ultimate vacuum as low as 0.01 Torr (0.013 mbar a). High pumping speed at pressures below 10 microns much lower than attainable with single stage pumps Ultimate Vacuum: 0.2 microns (McLeod Gauge) Positive pressure lubrication assures operation at any pressure up to atmospheric pressure No metal-to-metal contact in pumping chamber Unequalled durability, even in dirty applications Triplex piston design for quiet, vibration-free operation The following table will help you select which model can best fit your application: Model CFM / m³/h HP / kW SDV-120 71/120 5/3.7 SDV-200 106/180 5/3.7 SDV-320 188/320 10/7.5 SDV-430 253/430 15/11 SDV-800 441/750 20/15 SDV-1500 882/1500 50/37 SDV-2700 1588/2700 75/55 Evacuating Refrigeration Systems Liquid Gas Storage Brake Filling Systems Low Pressure Chemical Vapor Deposition Silicon Crystal Growing Leak Detection Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first SDV 120 200 pecifications Sheet SDV 320 430 Specifications Sheet SDV 800 Specifications Sheet SDV Series Dry Vacuum Pumps - Installation Manual";
s[39] = "Kinney® KLRC Liquid Ring Vacuum Pump^KLRC_Liquid_Ring_Vacuum_Pumps.html^Kinney® KLRC™ liquid ring vacuum pumps are ideally suited for pumping wet mixtures and even slugs of liquid. KLRC pumps are available in standard, all iron construction (no yellow metals) and 316 stainless steel.Complete engineered system solutions, including instrumentation, controls, piping and valves; self-contained liquid recovery and recirculation are also available. KLRC liquid ring vacuum pumps can achieve vacuum of 4 Torr (5.3 mbar a). Please note that final pressure is limited by the vapor pressure of the sealing liquid, which can be water, oil or process liquids.Show more about Kinney® Liquid Ring Vacuum Pumps The KLRC is a non-pulsating vacuum pump designed to remove gases through the use of rotating impeller blades that enter and leave a ring of liquid. The impeller forces this sealing liquid to the periphery of the pump casing, where it forms a moving ring of liquid around a center void.The impeller shaft is mounted above the centerline of the casing; while the blades, although rotating concentrically, are located eccentrically with respect to the casing and the ring of liquid. The pump's axial suction and discharge ports are exposed to the void but separated by the impeller blades and the liquid ring.The rotating blades enter deeper into the liquid ring, progressively reducing the entrapment space, compressing and then exhuasting the gas through the discharge port. The liquid ring acts like a liquid piston, meaning the entire pumping operation is accomplished without vanes, valves, pistons or any metal-to-metal contact. Specifications Features Applications Model Selection Warranty Documents Performance Specifications:Two Stage Design Capacity: 40 - 1060 CFM (68 - 1802 m3/h) Maximum Vacuum: 29 Hg (23 Torr) Material Specifications: Casing and Impellers (options): Cast iron casing, bronze impeller Cast Iron casing, stainless impeller All Stainless Steel Shafts: 316 stainless steel Bearings: Drive End: Double-row ball Non-Drive End: Cylindrical roller Mechanical Seals: Double mechanical shaft seals Type 21 with Viton elastomer Self compensate with Viton/EPR/Teflon encapsulated or Kalrez O Ring (Code L/M/P) Type 8 with Viton Type 9 with Viton Impellers positively locked to shaft Reliable mechanical seals for high-integrity sealing and low shaft friction Center-anchored tie rods allow access to either end of the pump without total disassembly Precision casting and CNC machining eliminates the need for body gasketing (process dependent) Replaceable end plates Clearance adjustments via shims Made in the USA Chemical and Pharmaceutical Processing Vapor Recovery Deaeration Extruders Crystallizers Central Vacuum Systems The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KLRC-40 35/60 5/3.7 KLRC-75 70/120 5/3.7 KLRC-100 100/170 7.5/5.5 KLRC-125 130/220 10/7.5 KLRC-200 205/350 15/11 KLRC-300 300/510 25/18.5 KLRC-525 560/950 50/37 KLRC-775 830/1410 75/56 KLRC-950 990/1680 100/75 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KLRC 40 75 Specification Sheet KLRC 100 125 Specification Sheet KLRC 200 300 Specification Sheet KLRC 525 526 Specification Sheet KLRC 950 951 Specification Sheet KLRC Product Manual - English";
s[40] = "Kinney® Rotary Piston Vacuum Pumps^Rotary_Piston_Vacuum_Pumps.html^Kinney® Rotary Piston Vacuum Pumps are quiet running with high capacity at both high and low pressures. These pumps also enjoy unparalleled ruggedness and reliability; some have been in system operation for over 70 years. Even in dirty applications, this reliability is due to no metal-to-metal contact from the clearances being filled with oil.KC Series Vacuum Pumps KD & KDH Series Vacuum Pumps KT Series Vacuum Pumps Two-stage. Two-piston Single Stage. Duplex Piston. Single Stage. Triplex Piston. KTC Series Vacuum Pumps KT-LP Series Vacuum Pumps Two-stage. Triplex Piston. Low Profile version of KT";
s[41] = "KC Series Vacuum Pump^KC_Series_Vacuum_Pump.html^Kinney® KC™ rotary piston vacuum pumps achieve the lowest possible pressures from mechanical pumps and are recommended for applications where the operating pressure is below 0.1 Torr (0.13 mbar).With no metal-to-metal contact from the clearances being filled with oil, these two-stage pumps are extremely rugged and reliable.Adjustable gas ballast valves are included as standard equipment for handling water and other vapor loads. Features Specifications Applications Model Selection Warranty Documents High pumping speed at pressures below 10 microns; much lower than attainable with single stage pumps Adjustable gas ballast permits handling of condensable vapors Oil sealed design provides for no metal-to-metal contact in pumping chamber Unequalled durability, even in dirty applications Air cooled Performance Specifications:Two Stage Design Capacity: 5 - 15 CFM (8 - 25 m³/h) Maximum Vacuum: 0.2 microns (McLeod Gauge) (0.0002 Torr)Evacuating Refrigeration Systems Liquid Gas Storage Brake Filling Systems Low Pressure Chemical Vapor Deposition (LPCVD) Silicon Crystal Growing Leak Detection The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KC-5 5/8.5 0.33/0.25 KC-8 8/14 0.5/0.37 KC-15 15/25 1.0/0.75 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KC Series Specification Sheet KC Series Operation Manual";
s[42] = "KD & KDH Series Vacuum Pumps^KD_KDH_Series_Vacuum_Pumps.html^ KD / KDH vacuum pumps are belt-driven, low-speed rotary piston pumps. Since these pumps have no metal-to-metal contact from the clearances being filled with oil, these pumps are rugged and reliable; some have been in system operation for over 70 years.Gas ballast and large oil capacity enable the KD / KDH models to handle moderate water or other vapor loads.KD models are air-cooled, KDH models are water-cooled.Features Specifications Applications Model Selection Warranty Documents Absolute pressures down to the low micron range Full pumping speed down to 1 Torr Long-life operation due to no metal-to-metal contact in the pumping chamber High resistance to abrasion and corrosion No small orifices to plug up Includes integral oil mist eliminator Adjustable gas ballast permits handling of condensable vapors Performance Specifications:Single Stage, Duplex Design Capacity: 33 - 165 CFM (8 - 25 m³/h) Maximum Vacuum: (0.001 Torr) Drying Chambers Degasifiers Filling Machinery Evacuation of Process Chambers The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KD-30 33/56.1 1.5/1.1 KD-50 52/88.4 2.0/1.5 KDH-130 134/227 5.0/3.7 KDH-150 150/255 7.5/5.5 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KD Series Specification Sheet KD Series Operation Manual KDH Series Operation Manual";
s[43] = "KT Series Vacuum Pump^KT_Series_Vacuum_Pumps.html^ KT pumps are quiet running vacuum pumps with high pumping capacity at both high and low pressures. The triplex piston design is practically vibration-free.All KT models include an integral, positive pressure lubrication system to insure reliable lubrication at all pressure levels.Adjustable gas ballast valves are included as standard equipment for handling water and other vapor loads. Features Specifications Applications Model Selection Warranty Documents Full pumping speed down to 1 Torr Can operate continuously at any pressure up to 100 Torr Ultimate pressure 10 Microns (McLeod Gauge) Adjustable gas ballast permits handling of condensable vapors No metal to metal contact in pumping chamber Unequaled durability, even in dirty applications Compact footprint design Simple installation, no special preparations required Triplex piston design provides quiet, vibration-free operation Performance Specifications:Single Stage Design Capacity: 100 - 780 CFM Maximum Vacuum: 0.010 Torr Vacuum Packaging Vacuum Furnaces Vacuum Coating The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KT-150C 144/245 7.5/5.5 KT-300D 296/503 15.0/11.0 KT-500D 484/822 30.0/22.0 KT-850D 778/1322 40.0/30.0 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KT Series Product Manual";
s[44] = "KTC Series Vacuum Pump^KTC_Series_Vacuum_Pumps.html^Kinney® KTC™ rotary piston vacuum pumps achieve the lowest possible pressures from mechanical pumps and are recommended for applications where the operating pressure is below 0.1 Torr (0.13 mbar).As there is no metal-to-metal contact from the clearances being filled with oil, these two-stage pumps are extremely rugged and reliable. Adjustable gas ballast valves are included as standard equipment for handling water and other vapor loads.As a result of their triplex piston design, KTC pumps are practically vibration-free. Features Specifications Applications Model Selection Warranty Documents High pumping speed at pressures below 10 microns much lower than attainable with single stage pumps Ultimate Vacuum: 0.2 microns (McLeod Gauge) Positive pressure lubrication assures operation at any pressure up to atmospheric pressure No metal-to-metal contact in pumping chamber Unequalled durability, even in dirty applications Triplex piston design for quiet, vibration-free operation Performance Specifications: Two Stage Design Capacity: 21 - 107 CFM Maximum Vacuum: 0.0002 Torr Evacuating Refrigeration Systems Liquid Gas Storage Brake Filling Systems Low Pressure Chemical Vapor Deposition Silicon Crystal Growing Leak Detection The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KTC-21 21/35 1.5/1.1 KTC-60 60/102 3.0/2.2 KTC-112 107/182 7.5/5.5 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KTC Series Specification Sheet KTC Series Operation Manual KTC Series Operation Manual 2";
s[45] = "KT-LP Series Vacuum Pump^KT-LP_Series_Vacuum_Pumps.html^KT-LP pumps are quiet running vacuum pumps with high pumping capacity at both high and low pressures. The triplex piston design is practically vibration-free.All KT-LP models include an integral, positive pressure lubrication system to insure reliable lubrication at all pressure levels.Adjustable gas ballast valves are included as standard equipment for handling water and other vapor loads.In addition, KT-LP pumps include integral oil mist eliminators and a compact, low-profile design. Features Specifications Applications Model Selection Warranty Documents Full pumping speed down to 1 Torr Ultimate pressure to 10 microns Low profile design (LP Designations) Unequaled durability even in dirty applications Integral Oil Mist Eliminator No metal-to-metal contact in pumping chamber Triplex piston design provides quiet, vibration-free operation Adjustable gas ballast permits handling of condensable vapors Compact design with easy access for maintenance Simple installation – no anchor bolts required Performance Specifications:ingle Stage Design Capacity: 150 - 780 CFM Maximum Vacuum: 0.01 Torr Vacuum Packaging Vacuum Furnaces Vacuum Coating The following table will help you select which model can best fit your application:Model CFM / m³/h HP / kW KT-170LP 100/170 5.0/3.7 KT-275LP 160/272 10.0/7.5 KT-505LP 296/503 15.0/11.0 KT-840VFP 484/822 30.0/22.0 KT-1350VFP 778/1322 40.0/30.0 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present:  Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs firstKTLP Series Specification Sheet KTLP Series Operation Manual KT-VFP Series Operation Manual";
s[46] = "Kinney® Rotary Vane Vacuum Pumps^Rotary_Vane_Vacuum_Pumps.html^Kinney® Rotary Vane Vacuum Pumps are ideally suited for clean or moderately contaminated applications when suction filters are fitted to the pump. These rotary vane pumps incorporate direct driven motors and integral oil mist eliminators. Gas ballast valves are standard for vapor handling.KVAC Series Vacuum Pumps KVA-KVAH Series Vacuum Pumps Two-stage. Single Stage.";
s[47] = "Products^KVAC_Series_Vacuum_Pumps.html^ KVAC rotary vane vacuum pumps are utilized in laboratories and industry. All models include gas ballast valves and KF flanges. A range of matching KF fittings is available from stock.Specifications Features Applications Model Selection Warranty Documents Performance Specifications:Flow ranges to 42 CFM (71 m³/h) Vacuum levels to 1.5 microns (.02 Pa) Quiet operation: 54-72 dB(A) Easy to operate; All controlas are located on the front of the pump External shat seal can be removed without dismantling the pump Compact, air cooled design; no cooling water required Integral anti-suckback valve Rugged design for efficient and reliable operation KF flange connections for quick piping connections Environmentally friendly very low oil mist emissions Flow ranges to 42 CFM (71 m³/h) Vacuum levels to 1.5 microns (.02 Pa) Quiet operation: 54-72 dB(A) Freeze Drying Filtering Tube Evacuation Vacuum Coating Low Pressure Chemical Vapor Deposition Backing of Diffusion or Turbomolecular vacuum pumps The following table will help you select which model can best fit your application: Model CFM / m³/h HP / kW KVAC-2 1.4/2.4 0.25/0.18 KVAC-5 3.8/6.5 0.75/0.56 KVAC-10 6.8/11.6 0.75/0.56 KVAC-15 11/19 0.75/0.56 KVAC-21 15/25 0.75/0.56 KVAC-33 23/39 1.5/1.1 KVAC-63 42/71 3.0/2.2 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KVAC 2 Specification Sheet KVAC 5 10 15 21 Specifcation Sheet KVAC 33 63 Specifcation Sheet";
s[48] = "Kinney® KVA-KVAH Series Vacuum Pump ^KVA-KVAH_Series_Vacuum_Pumps.html^Kinney oil-flooded, multi-vane vacuum pumps are single stage, air cooled and direct driven. This simple design ensures the reliability and durability that is required in the vacuum industry.Features Specifications Applications Model Selection Warranty Documents Carbon composite vane material for long life (models KVA/KVAH100 and larger) Direct-coupled TEFC high efficiency motor Oil level sight glass Wire mesh inlet screen Integral oil mist exhaust filter Spin-on oil filter (models KVA/KVAH25 and larger) Anti-suckback valve to isolate the pump from the process when the pump is not operating Integral exhaust filter Air cooled design Small, compact design affords point-of-service usage Drop-in replacement for Busch R5 Series™ vane pumps Performance Specifications: Full pumping speed from atmospheric pressure down to ~7.5 Torr (~10 mbar) Ultimate pressures to 0.5 Torr (0.67 mbar) Quiet operation: 59-83 dB(A) at 1 m  Vacuum Packaging Meat Packing Vacuum Chucking & Holding Central Vacuum Systems Medical/Dental Vacuum Electronic Assembly Plastic Thermoforming Food Processing The following table will help you select which model can best fit your application:Model ACFM HP KVA12 7 0.75 KVA21 15 1.0 KVA25 21 1.5 KVAH25 21 1.5 KVA40 31 2.0 KVAH40 31 2.0 KVA63 45 3.0 KVAH63 45 3.0 KVA100 70 5.0  KVAH100 70 5.0 KVA160C 117 7.5 KVAH160C 117 7.5 KVA250D 180 10 KVAH250D 180 10 KVA400C 330 15 KVA630C 460 25 Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KVA/KVAH Rotary Vane Vacuum Pumps - Product Data Sheet KVA/KVAH Rotary Vane Manual";
s[49] = "M-D Vacuum Boosters^Vacuum_Boosters_Pumps.html^Tuthill M-D Vacuum Boosters are among the most efficient vacuum boosters available, with quiet operation. Complete mechanical sealing ensures oil-free operation. Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels. M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.  Mechanical Sealed M-D Vacuum Boosters Slinger Sealed M-D Vacuum Boosters";
s[50] = "Mechanical Sealed M-D Vacuum Booster^Mechanical_Sealed_M-D_Booster.html^Tuthill M-D Vacuum Boosters are among the most efficient vacuum boosters available, with quiet operation. Mechanical sealled vacuum boosters incorporate mechanical sealing on the rotor shafts and the drive shaft. Mechanical sealed vacuum boosters provide dependable oil-free discharge with seal leakage rates no greater than 10-4 mL/second.M-D Pneumatics™ 3200 (Mechanical Sealed Vacuum Booster) M-D Pneumatics™ 4000 (Mechanical Sealed Vacuum Booster) M-D Pneumatics™ 5500(Mechanical Sealed Vacuum Booster) Nominal flows to 400 CFM (680m3/h). Nominal flows to 720 CFM (1220m3/h). Nominal flows to 2700 CFM (4590m3/h).M-D Pneumatics™ 7000(Mechanical Sealed Vacuum Booster) M-D Pneumatics™ 9000 (Mechanical Sealed Vacuum Booster) M-D Pneumatics™ 1200 (Mechanical Sealed Vacuum Booster) Nominal flows to 2180 CFM (3700m3/h). Nominal flows to 4500 CFM (7650m3/h). Nominal flows to 12700 CFM (21600m3/h).";
s[51] = "Model 3200 Mechanical Sealed Vacuum Booster^3200_Mechanical_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance pecifications:Pumping speeds up to 400 CFM (680 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Single row ball Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings    For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.  Polished Sealing Surfaces    All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested  Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 3200 Vacuum Booster Spec Sheet 3200 Vacuum Booster Product Manual 3200 C-Flange Booster Product Manual 3200-90 Booster Outline Drawings 3200-90C Booster Outline Drawings 3200-91C Booster Outline Drawings 3200-91T Booster Outline Drawings 3200-M90C Booster Outline Drawings 3200 Booster Performance Curves 3200_ko Booster Performance Curves 3200_msr_vs_p1 Booster Performance Curves 3200_vb_hp Booster Performance Curves 3200_trc_vs_p1 Booster Performance Curves 3200_vb_ve Booster Performance Curves";
s[52] = "Model 4000 Mechanical Sealed Vacuum Booster^4000_Mechanical_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels. M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 720 CFM (1220 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Cylindrical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing  Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings  For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. ositive End Clearances    Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces    All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested  Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 4000 Vacuum Booster Spec Sheet 4000 Vacuum Booster Product Manual 4000 C-Flange Booster Product Manual 4000 Booster Performance Curves 4000_msr_vs_p1 Booster Performance Curves 4000_vb_hp Booster Performance Curves 4000_trc_vs_p1 Booster Performance Curves 4000_vb_ve Booster Performance Curves 4000-90-92 Booster Outline Drawings 4000-90C-92C Booster Outline Drawings 4000-90EC Booster Outline Drawings 4000-91-93 Booster Outline Drawings 4000M90-92 Booster Outline Drawings 4000M90C-92C Booster Outline Drawings 4000M90EC Booster Outline Drawings";
s[53] = "Model 5500 Mechanical Sealed Vacuum Booster^5500_Mechanical_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 2700 CFM (4590 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Single row ball Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 5500 Vacuum Booster Spec Sheet 5500 Vacuum Booster Product Manual 5500 C-Flange Booster Product Manual 5500 Booster Performance Curves 5500_ko Booster Performance Curves 5500_msr_vs_p1 Booster Performance Curves 5500_vb_hp Booster Performance Curves 5500_trc_vs_p1 Booster Performance Curves 5500_vb_ve Booster Performance Curves 5500-90 Booster Outline Drawings 5500-90E Booster Outline Drawings 5500-91T Booster Outline Drawings 5500-90C-92C Booster Outline Drawings 5500-90C Booster Outline Drawings 5500-91C-93C Booster Outline Drawings 5500-92 Booster Outline Drawings 5500M90C-92C Booster Outline Drawings 5500M90E Booster Outline Drawings 5500M90EC Booster Outline Drawings";
s[54] = "Model 7000 Mechanical Sealed Vacuum Booster^products.html^M-D Pneumatics™ 7000 Mechanically Sealed Vacuum Boosters are used to supercharge vacuum pumps to greatly extend pump performance.This allows for much faster pumping speeds and deeper vacuum levels. M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Model 7000 vacuum boosters provide pumping speeds to 4500 CFM (7650 m³/h).Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 4500 CFM (7650 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball Back end: Cylindrical roller Drive shaft: Cylindrical rollerl Seals: Drive shaft: Mechanical Rotor shaft: Mechanical Lubrication: Oil splash, with water cooled end plates (standard) Integral pressure lubrication with water cooled end plates (optional) Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 7000 Vacuum Booster Spec Sheet 7000 Vacuum Booster Product Manual 7000 C-Flange Booster Product Manual 7000-90 Booster Outline Drawings 7000-90EC Booster Outline Drawings 7000-91 Booster Outline Drawings 7000M90EC Booster Outline Drawings 7000M91EC Booster Outline Drawings 7000 Booster Performance Curves 7000_msr_vs_p1 Booster Performance Curves 7000_trc_vs_p1 Booster Performance Curves 7000_vb_hp Booster Performance Curves 7000_vb_ve Booster Performance Curves";
s[55] = "Model 9000 Mechanical Sealed Vacuum Booster^9000_Mechanical_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications:Pumping speeds up to 4500 CFM (7650 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications: Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Double row ball Drive shaft: Spherical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash, with water cooling coils (standard) Integral pressure lubrication with heat exchanger (optional) Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 9000 Vacuum Booster Spec Sheet 9000 Vacuum Booster Product Manual 9000 C-Flange Booster Product Manual 9000 Performance Curves 9000_trc_vs_p1 Performance Curves 9000_msr_vs_p1 Performance Curves 9000_vb_hp Performance Curves 9000_vb_ve Performance Curves 9000-90-92 Outline Drawings 9000-91-93 Outline Drawings";
s[56] = "Model 1200 Mechanical Sealed Booster^1200_Mechanical_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 12,700 CFM (21600 m³/h) Available in special materials such as: Stainless steel Carbon steel Ductile Iron Electroless nickel plated Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Double row ball Drive shaft: Spherical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Integral pressure lube standard Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty: Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 1200 Vacuum Booster Spec Sheet 1200 Vacuum Booster Product Manual 1200-31-35 Booster Outline Drawings 1200-33-37 Booster Outline Drawings 1200 Vacuum Booster Performance Curve 1200_msr_vs_p1 Booster Performance Curves 1200_trc_vs_p1 Booster Performance Curves 1200_vb_hp Booster Performance Curves 1200_vb_ve Booster Performance Curves";
s[57] = "Slinger Sealed M-D Vacuum Booster^Slinger_Sealed_M-D_Booster.html^Tuthill M-D Vacuum Boosters are among the most efficient vacuum boosters available, with quiet operation. Slinger sealed vacuum boosters utilize a mechanical drive shaft seal in conjunction with non-contacting, non-wearing slinger seals on the rotor shafts, and are dependable performers for air and many gas applications. M-D Pneumatics™ 3200 (Slinger Sealed Vacuum Booster) M-D Pneumatics™ 4000 (Slinger Sealed Vacuum Booster) M-D Pneumatics™ 5500 (Slinger Sealed Vacuum Booster) Nominal flows to 400 CFM (680m3/h). Nominal flows to 720 CFM (1220m3/h). Nominal flows to 2700 CFM (4590m3/h).M-D Pneumatics™ 9000 (Slinger Sealed Vacuum Booster) M-D Pneumatics™ 1200 (Slinger Sealed Vacuum Booster) Nominal flows to 5770 CFM (7650m3/h). Nominal flows to 12700 CFM (21600m3/h).";
s[58] = "Model 3200 Slinger Sealed Vacuum Booster^3200_Slinger_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 400 CFM (680 m³/h) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Cylindrical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 3200 Vacuum Booster Spec Sheet 3200 Vacuum Booster Product Manual 3200 C-Flange Booster Product Manual 3200-90 Booster Outline Drawings 3200-90C Booster Outline Drawings 3200-91C Booster Outline Drawings 3200-91T Booster Outline Drawings 3200-M90C Booster Outline Drawings 3200 Booster Performance Curves 3200_ko Booster Performance Curves 3200_msr_vs_p1 Booster Performance Curves 3200_vb_hp Booster Performance Curves 3200_trc_vs_p1 Booster Performance Curves 3200_vb_ve Booster Performance Curves";
s[59] = "Model 4000 Slinger Sealed Vacuum Booster^4000_Slinger_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications:Pumping speeds up to 720 CFM (1220 m³/h) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Cylindrical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances   Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 4000 Vacuum Booster Spec Sheet 4000 Vacuum Booster Product Manual 4000 C-Flange Booster Product Manual 4000 Booster Performance Curves 4000_msr_vs_p1 Booster Performance Curves 4000_vb_hp Booster Performance Curves 4000_trc_vs_p1 Booster Performance Curves 4000_vb_ve Booster Performance Curves 4000-90-92 Booster Outline Drawings 4000-90C-92C Booster Outline Drawings 4000-90EC Booster Outline Drawings 4000-91-93 Booster Outline Drawings 4000M90-92 Booster Outline Drawings 4000M90C-92C Booster Outline Drawings 4000M90EC Booster Outline Drawings";
s[60] = "Model 5500 Slinger Sealed Vacuum Booster^5500_Slinger_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications: Pumping speeds up to 2700 CFM (4590 m³/h) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Cylindrical roller Drive shaft: Single row ball Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash system with water cooling coils, both ends Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components.Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 5500 Vacuum Booster Spec Sheet 5500 Vacuum Booster Product Manual 5500 C-Flange Booster Product Manual 5500 Booster Performance Curves 5500_ko Booster Performance Curves 5500_msr_vs_p1 Booster Performance Curves 5500_vb_hp Booster Performance Curves 5500_trc_vs_p1 Booster Performance Curves 5500_vb_ve Booster Performance Curves 5500-90 Booster Outline Drawings 5500-90E Booster Outline Drawings 5500-91T Booster Outline Drawings 5500-90C-92C Booster Outline Drawings 5500-90C Booster Outline Drawings 5500-91C-93C Booster Outline Drawings 5500-92 Booster Outline Drawings 5500M90C-92C Booster Outline Drawings 5500M90E Booster Outline Drawings 5500M90EC Booster Outline Drawings";
s[61] = "Model 9000 Slinger Sealed Vacuum Booster^9000_Slinger_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications:Pumping speeds up to 4500 CFM (7650 m³/h) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Double row ball Drive shaft: Spherical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Oil splash, with water cooling coils (standard) Integral pressure lubrication with heat exchanger (optional)Helical Gearing    Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 9000 Vacuum Booster Spec Sheet 9000 Vacuum Booster Product Manual 9000 C-Flange Booster Product Manual 9000 Performance Curves 9000_trc_vs_p1 Performance Curves 9000_msr_vs_p1 Performance Curves 9000_vb_hp Performance Curves 9000_vb_ve Performance Curves 9000-90-92 Outline Drawings 9000-91-93 Outline Drawings";
s[62] = "Model 1200 Slinger Sealed Booster^1200_Slinger_Sealed_Booster.html^Vacuum boosters are used to “supercharge” vacuum pumps to greatly extend pump performance. This allows for much faster pumping speeds and deeper vacuum levels.M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems are utilized worldwide in the manufacture of chemicals, petrochemicals, plastics, semiconductors and wood composites as well as food processing, vacuum furnace applications and many other general applications in industry.Specifications Features Applications Warranty Documents Performance Specifications:Pumping speeds up to 12,700 CFM (21600 m³/h) Material Specifications:Housing: Cast iron End Plates: Cast iron End Cover: Cast iron Rotors: Ductile iron Shafts: Ductile iron, cast integrally with rotors Drive Shaft: SAE 4140 forged alloy steel Gears: Heat treated alloy steel, helical cut and precision ground Bearings: Gear end: Double row ball, both rotors Back end: Double row ball Drive shaft: Spherical roller Seals: Drive shaft: Mechanical Rotor shaft: Non-contacting slinger Lubrication: Integral pressure lube standard Helical Gearing Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. Double Row Ball Bearings For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. Rotors with Integral Shafts Tuthill vacuum boosters are vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.Positive End Clearances Eliminates the risk of shifting end clearances when installing or removing drive components. Polished Sealing Surfaces All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.Individually Tested Every M-D™ Vacuum Booster is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. Supercharging vacuum pumps for better system performance Increasing vacuum system capacities Reducing system ultimate pressures Every M-D Vacuum Booster is backed by the Tuthill Vacuum & Blower Systems limited warranty:Type of Application Atmospheric Air or Process Air without Liquids Present: Process Gases Other than Air, or Any Liquid Injected Application: 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first 1200 Vacuum Booster Spec Sheet 1200 Vacuum Booster Product Manual 1200-31-35 Booster Outline Drawings 1200-33-37 Booster Outline Drawings 1200 Vacuum Booster Performance Curve 1200_msr_vs_p1 Booster Performance Curves 1200_trc_vs_p1 Booster Performance Curves 1200_vb_hp Booster Performance Curves 1200_vb_ve Booster Performance Curves";
s[63] = "Vacuum Systems^Vacuum_Systems.html^Vacuum Systems";
s[64] = "Custom Packages^Custom_Packages.html^Custom Packages";
s[65] = "Oil & Lubricants^PneuLube_Oil.html^Oil and lubricants from Tuthill Vacuum and Blower Systems are specifically blended to tackle your toughest rotary blower and vacuum applications. The special formulation quadruples oil life expectancy as compared to conventional mineral oils, requiring fewer oil changes and allowing for longer maintenance intervals. PneuLube™ Food Grade Blower Lubricant PneuLube™ Industrial Grade Blower Lubricant PneuLube™ Grease Vacuum Oils";
s[66] = "PneuLube Blower Lubricants^Pneulube_Blower_Lubricants.html^PneuLube™ synthetic oil from Tuthill Vacuum and Blower Systems are specifically blended to tackle your toughest rotary blower applications. As a result of this specific proprietary formulation, PneuLube™ can be utilized in low temperature as well as high temperature ambient conditions, providing a single, all-purpose lubricant for any rotary blower application.Food Grade Blower Lubricant Industrial Grade Blower Lubricant";
s[67] = "Food Grade Blower Lubricant ^Food_Grade_Blower_Lubricant.html^PneuLube™ Blower Oil is formulated with synthesized hydrocarbon fluids adn selected additives to provide superior resistance against oxidation, and maximum protection from wear rust, corrosion and foaming. PneuLube provides unserpassed thermal and oxidation stability as well as increased protection from viscosity loss as compared to conventional mineral oils.The high viscosity index of PneuLube™ provides higher viscosities and greater film strength at higher temperatures and lower viscosities at low temperatures for minimum friction and better lubrication than other synthetic blower lubricants on the market today.Features Applications Compatibility Documents Features Food Grade – meets 21 CFR 178.3570 (formerly USDA H-1) for lubricants with the possibility of incidental contact with foodstuffs  Available in convenient quarts, gallons and 5-gallon containers Specially formulated for high performance applications Compatible with most materials of construction Fully compatible in hydrogen applications  PneuLube™ Physical Properties Viscosity Grade: ISO 100 Specific Gravity at 16° C (62° F): 0.859 Viscosity at 40° C (104° F): 91.8 cSt Viscosity at 100° C (212° F): 13.1 cSt Viscosity Index: 142 Pour Point: -51° C (-60° F) Flash Point: -246° C (475° F) Copper Corrosion Rating: 1A PneuLube™ is available in:Individual pints, quarts, half-gallons and gallons Case lots of all of the above sizes 5-gallon pails and 55-gallon barrels Industrial Blowers Vacuum Boosters Truck Blowers PnueLube™ is compatible with essentially all seal materials, elastomers and paints, including:Buna-N acrylonitrile Neoprene Viton® Teflon® Polyethylene Polyurethane ether Flourocarbon Polysulfate Polyacrylate Ethylene acrylic Epoxy Plastisol PVC Acrylic paint Lacquer PneuLube™ is also fully compatible with hydrogen service applications. PneuLube does not thicken or congeal in the presence of hydrogen.PneuLube Specification Sheet PneuLube Material Safety Data Sheet";
s[68] = "Industrial Grade Blower Lubricant^Industrial_Grade_Blower_Lubricant.html^PneuLube™ Blower Oil is formulated with synthesized hydrocarbon fluids adn selected additives to provide superior resistance against oxidation, and maximum protection from wear rust, corrosion and foaming. PneuLube provides unserpassed thermal and oxidation stability as well as increased protection from viscosity loss as compared to conventional mineral oils. The high viscosity index of PneuLube™ provides higher viscosities and greater film strength at higher temperatures and lower viscosities at low temperatures for minimum friction and better lubrication than other synthetic blower lubricants on the market today.Features Applications Compatibility Documents Features Food Grade – meets 21 CFR 178.3570 (formerly USDA H-1) for lubricants with the possibility of incidental contact with foodstuffs Available in convenient quarts, gallons and 5-gallon containers Specially formulated for high performance applications Compatible with most materials of construction Fully compatible in hydrogen applications PneuLube™ Physical Properties Viscosity Grade: ISO 100 Specific Gravity at 16° C (62° F): 0.859 Viscosity at 40° C (104° F): 91.8 cSt Viscosity at 100° C (212° F): 13.1 cSt Viscosity Index: 142 Pour Point: -51° C (-60° F) Flash Point: -246° C (475° F) Copper Corrosion Rating: 1A PneuLube™ is available in:Individual pints, quarts, half-gallons and gallons Case lots of all of the above sizes 5-gallon pails and 55-gallon barrels Industrial Blowers Vacuum Boosters Truck Blowers PnueLube™ is compatible with essentially all seal materials, elastomers and paints, including: Buna-N acrylonitrile Neoprene Viton® Teflon® Polyethylene Polyurethane ether Flourocarbon Polysulfate Polyacrylate Ethylene acrylic Epoxy Plastisol PVC Acrylic paint Lacquer PneuLube™ is also fully compatible with hydrogen service applications. PneuLube does not thicken or congeal in the presence of hydrogen.PneuLube Specification Sheet PneuLube Material Safety Data Sheet";
s[69] = "Vacuum Oils^Vacuum_Oils.html^Vacuum oil and lubricants from Tuthill Vacuum and Blower Systems are specifically blended to tackle your toughest vacuum applications. The special formulation quadruples oil life expectancy as compared to conventional mineral oils, requiring fewer oil changes and allowing for longer maintenance intervals.The right oil for your Tuthill, Kinney®, or AF™ vacuum pump.Mineral & Synthetic Lubricants Fire-Resistant & Inert Lubricants Documents Mineral & Synthetic Lubricants Type Description AX A high quality, high boiling range, low vapor pressure, and non-additive petroleum based oil for oil-sealed mechanical pumps having an ultimate pressure specification of up to .0002 Torr.Viscosity: Approx. 340 SSU @ 100° F. KV-100 Specially formulated for peak performance in all KT pumps. Contains additives to increase oil life and reduce varnish build-up.Viscosity: Approx. 500-525 SSU @ 100° F. LBX-300X-Ucon An effective lubricant in oil-sealed mechanical pumps that is fully compatible with fluid for automotive filling applications.Viscosity: Approx. 300 SSU @ 100° F. LR A highly refined hydrocarbon oil used in Liquid Ring vacuum pumps.Viscosity: Approx. 150 SSU @ 100° F. LT Recommended for KT and other single stage pumps where low temperature starting (45-60° F[7-15° C]) is required.Viscosity: Approx. 300 SSU @ 100°F. S500 Synthetic ISO diester-based oil designed to provide high temperature and long-term lubrication with minimal deposit formation.Viscosity: Approx. 98.8 cSt @ 40° C. POE A synthetic lubricant formulated with selected Polyol Ester base stocks and with additives, which provide lubricity, stability and resistance to corrosion. Compatible in R134A applications.Viscosity: Approx. 62.5 cSt @ 40° C Fire-resistant & Inert Lubricants Type Description Halovac For oil-sealed mechanical pumps for semiconductor processes where pumped gases react rapidly with conventional pump oils. Halocarbon oils are the primary lubricants in processes using pure oxygen and other strong oxidizing agents.Mechanical pumps may require heaters for starting. Pumps operated with conventional oils must be thoroughly cleaned before using Halocarbon. Viscosity: Approx. 580 SSU @ 100° F. Vapor Pressure: 0.007 Torr @ 73° C.Kinlube 220 A fire-resistant, phosphate fluid for oil-sealed mechanical pumps with an ultimate pressure of 0.03 Torr (single stage) and .005 Torr (compound).Viscosity: Approx. 219 SSU @ 100° F. Technical Bulletin #36 - What oil should I use in my Kinney Vacuum Pump, and how often should I change it? AX OIL - MSDS Halovac Oil - MSDS Kinlube 220 - MSDS KV100 Oil - MSDS LR Oil - MSDS LT Oil - MSDS POE Oil - MSDS S 500 Synthetic Oil - MSDS UCON LB300X Oil - MSDS LT Oil D250-81 - Data Sheet KV-100 Oil D250-89 - Data Sheet Halovac Oil D250-94 - Data Sheet Ucon Oil D250-98 - Data Sheet Kinlube 220 D250-116 - Data Sheet LR Oil D250-119 - Data Sheet Kinney POE Oil D250-127 - Data Sheet AX Oil D250-137 - Data Sheet S500 D250-139 - Data Sheet";
s[70] = "Services^services.html^Award Winning Customer Service Air & Gas Systems, Inc. is an award winning distributor and service provider for positive displacement blowers, vacuum pumps, and related equipment. Every day we strive to offer custom solutions tailored to your process and application – upheld by an unparalleled level of support, knowledge, and experience. Our product line includes: Repair Fabrication ";
s[71] = "Fabrication^Fabrication.html^Custom Blower & Vacuum Packages We provide several specific application gas compression skids with experience in design engineering and custom fabrication in our ASME Code certified shop.Whether your project involves a simple functionally driven requirement or a complex specification for a complete engineered system, we stand ready to provide alternative solutions that will provide your business with a reliable, efficient and economical solution. View our Applications page to find out more about some of the various process applications we provide. Also, check out our Photo Gallery to see more of our work. To request more information about designing and building your custom package, contact us today.";
s[72] = "Repair^Repair.html^Dependable Maintenance & Repair With over 20 years of experience in the repair of all brands of positive displacement blowers, vacuum pumps, and centrifugal compressors, we are able to repair and remanufacture all of your equipment to original factory condition. We perform repairs on all major brands of rotary lobe, liquid ring, rotary piston, sliding vane, and other positive displacement blowers and vacuum pumps.Brand Repair Capabilities Tuthill Roots Gardner Denver MD Pnuematics Sutorbilt DuroFlow Aerzen  Robuschi Lamson Hoffman and others Repair Process When you send your positive displacement blower to Air & Gas Systems, it will undergo a thorough repair and inspection. During disassembly each repair undergoes a rigorous cleaning process which includes bead blasting of impellers, housing, and head plates. We also report to you its current condition and any neccesary actions prior to making it like new. Upon completing the repair, a complete mechanical test is performed on all repaired blowers, including a high vacuum booster pump down and blank-off test to one micron of vacuum. In addition, a fresh coat of paint is applied.Low Prices We promise competitive prices. If your blower is beyond repair or the cost of repair is more than the cost of a replacement, we can offer you a new blower of the original manufacturer or recomend a different model. Tuthill makes a variety of blowers and pumps that will fit right into your existing process without any modification, and at a lower cost than Roots, Sutorbilt or Gardner Denver. View our price comparison table.For more information on our positive displacement blower repair services, or to schedule a repair, contact us today.";
s[73] = "Facilities^Facilities.html^Air & Gas Systems, Inc. Air & Gas Systems operates in an 18,000 square foot facility, strategically located in Houston, TX. Right near the junction of Beltway 8 and 290. Our efficient layout gives us the capability of repairing several blowers and pumps while engineering and manufacturing custom packages for many types of applications.For more information on any of our products or services, contact us today.";
s[74] = "Applications^applications.html^Landfill and Bio Gas Projects reclaim methane gas from landfills and bio waste plants to scrub the gas, compress it, and then boost into engine generators to produce electricity or boost to boilers to feed gas into plants, or sales lines for utility gas.Vapor Recovery We have provided blowers, liquid ring pumps, sliding vane, and rotary screw compressors for these applications. Taking gas in at generally atmospheric pressure and discharge from 5 psig up to 250 psig. Custom control panels with PLC processors, allow us to hold inches of water column suction pressures constant.Propane Compression Compression of propane gas in gas plant refrigeration systems to produce liquefied gas and stripping out the heavier hydrocarbons at gas processing plants in the production fields.Gas Boosting Applications involve boosting gas from low to medium pressure up to higher pressures, using small reciprocating gas compressors and rotary screw gas compressors.";
s[75] = "Request A Quote^requesta-quote.html^Thank you for your interest in Air & Gas Systems. To have one of our engineers contact you to discuss your repair or custom fabrication needs, please enter your contact information below. Name Company Name  Phone number E-mail Comments";
s[76] = "Photos & E-Library^photo-gallery.html^Photo Gallery Welcome to our Photo Gallery and e-Library. Here you will see pictures of some various applications and custom enginneered packages within our portfolio.150 HP process gas rotary screw compressor used in combination vacuum and compression of Isobutylene gas in a petrochemical plant. Several cast steel blowers with special bi-protect plating used in a major petrochemical facility for vapor recovery of gas containing Acetone. Includes special seals with purge systems installed. Landfill Gas Recovery and compression skid with positive displacement blowers. Gas is fuel for special landfill gas engine generators for alternative energy power generation.  Reciprocating gas compressor package, boosting pipeline gas to 700psi.Liquid Ring Vacuum Pump skid, 4000 ICFM at 15” Hg Vac, 250 HP used on a vapor recovery process in a major petrochemical plant, pumping Nitrogen with Ethylene gas. Blower package with jackshaft drive, 300 HP used in a PET conveying application to load railcars. Package instrument air skid with (2) 150 HP screw compressors and dual tower desiccant regenerative dryer. A sliding vane compressor package used in vapor recovery. Gas blower package with stainless steel silencers and acoustic treatment used in Biogas recovery. A Dry Screw Vacuum Package used for deep vacuum on a distillation column. Standard air blower package inside a noise enclosure for wastewater treatment aeration Top E-Library Click on the links below to view and print any of our literature.Price Comparison Table Air & Gas Systems Repair Brochure Air & Gas Systems Fabrication Brochure Tuthill Data Sheets & Blower Specs Tuthill Bowers Brochure Kinney Vacuum Pumps Catalog ";
s[77] = "Technical Library^technical-library.html^Click on the links below to view and print any of our literature. You can also find the same individual product literature within our Products area. Click the section headings to expand and collapse each section.FAQs and Other Literature: FAQs I just received a new blower, now what?Your blower must be properly lubricated before operation. Blowers are shipped dry, and need the proper amount of oil prior to installation and operation. Air & Gas Systems provides all product manuals for download on our website - see below in Blower Documents.I have a Tuthill Competitor blower, what kind of lubrication is required?To get the best efficiency out of your blower and to ensure long life, proper lubrication is key. We recommend using PneuLube™ synthetic oil from Tuthill - we stock cases of PneuLube™ oil. Some Tuthill blowers utilize grease on the drive end, in such cases we recommend PneuLube™ Lithium Comlex Grease - in stock as well. My blower is making a high pitched grinding sound, what should I do? Typically this type of sound is a result of worn out bearings that need to be changed. We can handle any type of blower repair on any blower brand. DO NOT TRY TO CHANGE BLOWER BEARINGS ON YOUR OWN, OR REPLACE THEM WITH STANDARD BEARINGS! Tuthill manufacturers custom ground bearings that provide longer life, and these bearings must be installed properly to ensure exact timing and clearances between the lobes. Contact us today for a free estimate. What should I do if my blower won't turn?If you have properly lubricated your blower, then typically if a blower won't turn over it is because either the bearings are completely shot or some product has become built up inside the blower housing. In most cases, an overhaul on your blower will need to be done. We can handle any type of blower repair on any blower brand. Contact us today for a free estimate. How often should I clean or change my filter?Generally a filter should be replaced or cleaned when the pressure drop on your blower exceeds 10 to 15 w.c. (water column) or 0.4 PSI to 0.6 PSI. Felt, polyester and wire media filters can generally be cleaned and typically do not need to be replaced. However, paper media elements are often considered disposable and cannot be cleaned. We stock quality filters, contact us for a free estimate.I can't read the nameplate on my blower, how can I tell what model I have?There are a number of ways you can identify your blower model without looking at the nameplate: Measure the following on your blower: Housing length, from end plate to end plate Distance between shaft centers Shaft diameter Connection size Determine the following features of your blower: Is the pipe connection threaded, flanged or have a special adapter? Are the feet bolt on or are they cast as part of the headplate? Is the flow through your blower horizontal or vertical? Contact us for help on determining what blower model you have? Technical Bulletins  Blowers & Blower Packages Technical Bulletin #1 - Blower Technical Data Technical Bulletin #4 - Recommended Lubricants for Tuthill M-D Pneumatics Rotary Blowers and Vacuum Boosters Technical Bulletin #7 - Vacuum Booster Data Sheet Technical Bulletin #13 - Typical Seal Configurations Technical Bulletin #15 - Guide to M-D Pneumatics Model Numbers Technical Bulletin #22 - Recommendations and Guidelines for Water/Liquid Injected Blowers Technical Bulletin #23 - Notes and Features for AcousticAir Low Noise Rotary Blowers Technical Bulletin #24 - Allowable Overhung Loads for M-D Pneumatics Blowers Technical Bulletin #25 - Instructions for Injecting Fuel Oil, Kerosene and Lube Oil Into Blowers Handling Sewage Gas Technical Bulletin #26 - Blower Speed and Reliability Technical Bulletin #27 - Recommended Guidelines for Rotary Positive Displacement Blowers in Oxygen Service Technical Bulletin #28 - Advantages of Rotary Positive Displacement Blowers Versus Centrifugal Blowers Technical Bulletin #29 - Avoiding Blower Problems With Mechanical Seals on Process Services Such as Steam, Vapor, Liquid Injected or Mixed Phase Inlets Technical Bulletin #30 - Blower markets by industry and application Technical Bulletin #32 - Solutions for High Lubricating Oil Temperatures Technical Bulletin #33 - Comparison of Vacuum Boosters Technical Bulletin #34 - Replacement of Competitive and Obsolete Blowers Technical Bulletin #37 - Truck Blower Rotation Vacuum Pumps & Systems Technical Bulletin #35 - Comparison of Kinney® KT™ Piston Pumps & Systems against Stokes® J-series Piston Pumps S Systems Technical Bulletin #36 - What oil should I use in my Kinney Vacuum Pump, and how often should I change it? Technical Bulletin #38 - Seal Recommendations for AF Pumps in Plastic Extrusion Applications Warranty Info  Tuthill Blower Warranty View Blower Warranty Tuthill Vacuum Pumps Warranty View Vacuum Pumps Warranty Blower Documents: Brochures  Air & Gas Systems, Inc Air & Gas Systems - Repair Brochure Air & Gas Systems - Fabrication Brochure Tuthill Blowers & Blower Packages Blower Selector Guide Qube Product Brochure Kit Lists  Competitor 2000-21-2200638B Kit List 3000-21-2-3300638C Kit List 3000-21-2-old-3300638B Kit List 3000-21-3300638B Kit List 3000-21-3300638C Kit List 3000-21-3300638D Kit List 3000-21-3300638E Kit List 3000-21-3300638F Kit List 3000-21-3-3300638D Kit List 3000-22-2-3300638G Kit List 3000-23-3300638F Kit List 3003-22-3-3300638E Kit List 4000-16-47-27305 Kit List 00-17-46-27306 Kit List 4000-21-2-4500638B Kit List 4000-21-3-4500638C Kit List 4000-21-4500638B Kit List 4000-21-4500638C Kit List 4000-21-4500638D Kit List 4000-21-4500638E Kit List 4000-21-4500638F Kit List 4000-22-2-4500638E Kit List 4000-22-3-4500638D Kit List 4000-23-4500638F Kit List 5000-21-2-5600638B Kit List 5000-21-3-5600638C Kit List 5000-21-5600638B Kit List 5000-21-5600638C Kit List 5000-21-5600638D Kit List 5000-21-5600638E Kit List 5000-21-5600638F Kit List 5000-22-2-5600638E Kit List 5000-22-3-5600638D Kit List 5000-22-5600638D Kit List 5000-23-5600638F Kit List 6000-21-6800638B Kit List Equalizer 4500-17-46-46172 Kit List 4600-17-46-46044 Kit List 6000-17-46-60035 Kit List PD Plus 1200-19-86-29219 Kit List 1200-31-33-14532 Kit List 1200-31-33-14532WC Kit List 1200-35-37-14533 Kit List 1200-35-37-14533WC Kit List 1200-55-82-29216 Kit List 1200-66-69-29217 Kit List 1200-66-69-29217WC Kit List 3200-16-47-28328 Kit List 3200-17-46-29238 Kit List 3200-46E-32067 Kit List 3200-57-81-29239 Kit List 3200-64-67-29240 Kit List 3200-67E-32069 Kit List 3200-81E-32068 Kit List 3200-90C-91C Kit List 3200-90C-91C-32184 Kit List 3200-90CE-16053 Kit List 3200-90E-32070 Kit List 3200-92-93-29208 Kit List 3200-92C-93C-32226 Kit List 3200-96-32017 Kit List 4000-46E-40033 Kit List 4000-57-81-27307 Kit List 4000-64-67-27308 Kit List 4000-67E-40035 Kit List 4000-81E-40034 Kit List 5500-16-47-27313 Kit List 5500-17-46-27315 Kit List 5500-46E-55083 Kit List 5500-57-81-27317 Kit List 5500-64-67-27318 Kit List 5500-67E-55085 Kit List 5500-81E-55084 Kit List 7000-17-46-77051 Kit List 7000-19-86-77110 Kit List 7000-21-7600638B Kit List 7000-55-82-77111 Kit List 7000-57-81-77069 Kit List 7000-64-67-90-91-77052 Kit List 7000-64C-67C-90C-77165 Kit List 7000-66-69-31-33-77101 Kit List 9000-17-19-46-86-29218 Kit List 9000-31-33-70625 Kit List 9000-35-37-70626 Kit List 9000-55-57-81-82-29241 Kit List 9000-64-66-67-69-29220 Kit List Qx 3200 Qx 18099-1 Kit List 4600 Qx 18099-2 Kit List 6000 Qx 18099-3 Kit List Vacuum Boosters 3200-90-91-29206 Kit List 4000-90-91-29209 Kit List 4000-90C-91C-40119 Kit List 4000-90CE-16054 Kit List 4000-90E-40036 Kit List 4000-92-93-29210 Kit List 4000-96-40011 Kit List 5500-90-91-29211 Kit List 5500-90C-91C-55272 Kit List 5500-90CE-16055 Kit List 5500-90E-55086 Kit List 5500-92-93-29212 Kit ist 5500-96-55001 Kit List 9000-90-91-30396 Kit List 9000-92-93-30397 Kit List Manuals Blower Packages Field Service Troubleshooting Manual PneuMaxII Product Manual PneuPak Field Troubleshooting Manual Qube Product Manual Competitor Competitor Plus Manual Field Service Troubleshooting Manual Equalizer qualizer Blower Product Manual Field Service Troubleshooting Manual PD Plus 1200 Series PD Plus Product Manual 3200 PD Plus Product Manual 4000 - 5500 PD Plus Product Manual 7000 MVB - PD PlusProduct Manual 9000 PD Plus roduct Manual Field Service Troubleshooting Manual Qx Series Product Manual Field Service Troubleshooting Manual Vacuum Boosters 1200 Vacuum Booster Product Manual 3200-4000-5500 Vacuum Booster Product Manual 7000 Vacuum Booster Product Manual 9000 Vacuum Booster Product Manual C-Flange Booster Product Manual Field Service Troubleshooting Manual  MSDS Lubrication PneuLube™ Oil aterial Safety Data Sheet PneuLube™ Grease Data Sheet   Outline Drawings Blower PackagesPneuMaxIIPneuMaxII 300 Outline Drawings PneuMaxII 800 Outline Drawings PneuPak 13 PneuPak 13-20-A Outline Drawings PneuPak 13-20-B Outline Drawings PneuPak 13-20-C Outline Drawings PneuPak 13-25-A Outline Drawings PneuPak 13-25-B Outline Drawings PneuPak 13-25-C Outline Drawings PneuPak 13-30-A Outline Drawings PneuPak 13-30-B Outline Drawings PneuPak 13-30-C Outline Drawings PneuPak 13-40-A Outline Drawings PneuPak 13-40-B Outline Drawings PneuPak 13-40-C Outline Drawings PneuPak 13-50-A Outline Drawings PneuPak 13-50-B Outline Drawings PneuPak 13-50-C Outline Drawings PneuPak 13-60-A Outline Drawings PneuPak 13-60-B Outline Drawings PneuPak 13-60-C Outline Drawings PneuPak 33 PneuPak 33-20-A Outline Drawings PneuPak 33-20-B Outline Drawings PneuPak 33-20-C Outline Drawings PneuPak 33-25-A Outline Drawings PneuPak 33-25-B Outline Drawings PneuPak 33-25-C Outline Drawings PneuPak 33-30-A Outline Drawings PneuPak 33-30-B Outline Drawings PneuPak 33-30-C Outline Drawings PneuPak 33-40-A Outline Drawings PneuPak 33-40-B Outline Drawings PneuPak 33-40-C Outline Drawings PneuPak 33-50-A Outline Drawings PneuPak 33-50-B Outline Drawings PneuPak 33-50-C Outline Drawings PneuPak 33-60-A Outline Drawings PneuPak 33-60-B Outline Drawings PneuPak 33-60-C Outline Drawings Qube Qube 800P Outline Drawings Qube 800V Outline Drawings  Standard Blower Packages 3200 HV2 3200 VV1 3200 VV1L 3200 VV1A 3200 V1A-L 3200 VV1A-E 3200 VV1A-DS 3200 VV1A-DSE 3200 VV1A-ISE 3200 HV3 3200 VV2 3200 VV2-L 3200 VV2L-L 3200 VV2L-E 3200 VV2A 3200 VV2A-L 3200 VV2A-E 3200 VV2A-DS 3200 VV2A-DSL 3200 VV2A-DSE 3200 VV2A-IS 4000 HV1 4000 VV1 4000 VV1L 4000 VV1A 4000 VV1A-L  4000 VV1A-DS 4000 VV1A-DSL 4000 VV1A-IS 4000 HV2 4000 VV2 4000 VV2L 4000 VV2L-E 4000 VV2A 4000 VV2A-L 4000 VV2A-E 4000 VV2A-DS 4000 VV2A-IS 4000 VV2A-ISE 4600 VV1A 4600 VV2A 5500 HV1 5500 HV2 5500 VV1 5500 VV1A 5500 VV1A-DS 5500 VV1A-E 5500 VV1L 5500 VV1L-L 5500 VV2 5500 VV2A 5500 VV2A-DSE  5500 VV2A-DS 5500 VV2A-E 5500 VV2A-L 5500 VV2L 5500 VV2L-L 5500 VV3 5500 VV3A 5500 VV3A-DS 5500 VV3A-E 5500 VV3A-IS 5500 VV3L 5500 VV3L-E 5500v VV3L-L 5500 VV4L 5500 VV5L 5500 VV5L-E 5500 VV6L 5500 VV6L-E 7000 VV1A 7000 VV1A-DS 7000 VV1L 7000 VV2 7000 VV2A 7000 VV2A-DS 7000 VV3A Competitor Models 2002 2004 21B-21T Outline Drawings Models 2002 2004 21L-21R Outline Drawings Models 3002 3003 3006 21B-21T Outline Drawings Models 3002 3003 3006 21L-21R Outline Drawings Models 4002 4005 4007 21B-21T Outline Drawings Models 4002 4005 4007 21L-21R Outline Drawings Models 5003 5006 5009 21B-21T Outline Drawings Models 5003 5006 5009 21L-21R Outline Drawings odels 6005 6008 6015 21B-21T Outline Drawings Models 7007 7011 7015 21L-21R Outline Drawings Models 7007 7011 7018 21B-21T Outline Drawings Models 3003 3006 4005 4007 5006 5009 Competitor Plus 21N Drawings Competitor GT-2Lobe Outline Drawings Competitor GT-2Lobe Outline Drawings (Metric) Competitor GT-3Lobe Outline Drawings Competitor SL-2Lobe Outline Drawings Competitor SL-2Lobe Outline Drawings (Metric) Competitor SL-3Lobe Outline Drawings Equalizer4500-17 Equalizer Blower Outline Drawings 4500-46 Equalizer Blower Outline Drawings  PD Plus1200 - 19 Blower Outline rawings 1200 - 86 Blower Outline Drawings 3200 - 17T-57T Blower Outline Drawings 3200 - 46-81 Blower Outline Drawings 4000 - 17-18-54-57 Blower Outline Drawings 4000 - 46-81 Blower Outline Drawings 5500-64T Blower Outline Drawings 5500-67 Blower Outline Drawings 7000-17-57-64 Blower Outline Drawings 7000-46-67-81 Blower Outline Drawings 9000-17-57 Blower Outline Drawings 9000-46-81 Blower Outline Drawings 9000-46G-81G Blower Outline Drawings Qx 3200 Qx Blower Outline Drawing 4600 Qx Blower Outline Drawing 6000 Qx Blower Outline Drawing  Vacuum Boosters 1200-31-35 Booster Outline Drawings 1200-33-37 Booster Outline Drawings 200-90 Booster Outline Drawings 3200-90C Booster Outline Drawings 3200-91C Booster Outline Drawings 3200-91T Booster Outline rawings 3200-M90C Booster Outline Drawings 4000-90-92 Booster Outline Drawings 4000-90C-92C Booster Outline Drawings 4000-90EC ooster Outline Drawings 4000-91-93 Booster Outline Drawings 4000M90-92 Booster Outline Drawings 4000M90C-92C Booster Outline Drawings 4000M90EC Booster Outline Drawings 5500-90 Booster Outline Drawings 5500-90E Booster Outline Drawings 5500-91T Booster Outline Drawings 5500-90C-92C Booster Outline Drawings 5500-90C Booster Outline Drawings 5500-91C-93C Booster Outline Drawings 5500-92 Booster Outline Drawings 5500M90C-92C Booster Outline Drawings 5500M90E Booster Outline Drawings 5500M90EC Booster Outline Drawings 7000-90 Booster Outline Drawings 7000-90EC Booster Outline Drawings 7000-91 Booster Outline Drawings 7000M90EC Booster Outline Drawings 7000M91EC Booster Outline Drawings 9000-90-92 Outline Drawings 9000-91-93 Outline Drawings Parts Lists Competitor 2000-21 Parts List 3000-21-Current Parts List 3000-21-Old Parts List 3000-22 Parts List 3000-22N Parts List 3000-23 Parts List 3000-23N Parts List 4000-17-46 Parts List 4000-21 Parts List 4000-22 Parts List 4000-22N Parts List 4000-23 Parts List 4000-23GT Parts List 4000-23N Parts List 4000-23N_GT_3Lobe Parts List 5000-21 Parts List 5000-21J Parts List 5000-21N Parts ist 5000-22 Parts List 5000-22N Parts List 5000-23 Parts List 5000-comp3 Parts List 6000-21 Parts List 6000-21J Parts List Equalizer 4500-17-46 Parts List 4600-17-46 Parts List 4700-17-46 Parts List 6000-17-46 Parts List PD Plus 1200-19-86 Parts List 1200-31-33 Parts List 1200-35-37 Parts List 1200-55-82 Parts List 1200-66-69 Parts List 3200-17-46 Parts List 3200-57-81 Parts ist 3200-64-67 Parts List 3200-90-91 Parts List 3200-92-93 Parts List 4000-57-81 Parts List 5500-17-46 Parts List 5500-57-81 Parts List 5500-64-67 Parts List 7000-17-46 Parts List 7000-18-85 Parts List 7000-19-86 Parts List 7000-21 Parts List 7000-21J Parts List 7000-31-33 Parts List 7000-54-84 Parts List 7000-55-82 Parts List 7000-57-81 Parts List 7000-64-67-90-91 Parts List 9000-17-46 Parts List 9000-19-86 Parts List 9000-31-33 Parts List 9000-35-37 Parts List 9000-55-82 Parts List 9000-57-81 Parts ist 9000-64-67 Parts List 9000-66-69 Parts List  Vacuum Boosters4000-90-91 Parts List 4000-90C-91C Parts List 4000-92-93 Parts ist 500-90-91 Parts List 5500-90C-91C Parts List 9000-90-91 Parts List 9000-92-93 Parts List Performance Curves Competitor Model 2002 Performance Curves Model 2004 Performance Curves Model 3002 Performance Curves Model 3003 Performance Curves Model 3003 3-Lobe Performance Curves Model 3006 Performance Curves Model 3006 3-Lobe Performance Curves Model 4002 Performance Curves Model 4005 Performance Curves Model 4005 3-Lobe Performance Curves Model 4007 Performance Curves Model 4007 3-Lobe Performance Curves odel 5003 Performance Curve Model 5006 Performance Curve Model 5006 3-Lobe Performance Curve Model 5009 Performance Curve Model 5009 3-Lobe Performance Curve Model 6005 Performance Curve Model 6008 Performance Curve Model 6015 Performance Curve odel 7006 Performance Curve Model 7011 Performance Curve Model 7018 Performance Curve Models 3003 3006 4005 4007 5006 5009 Competitor Plus 21N Outline Drawings Equalizer 4504 Equalizer Blower Perfomance Curves 4506 Equalizer Blower Perfomance Curves 4509 Equalizer Blower Perfomance Curves 4512 Equalizer Blower Perfomance Curves PD Plus 1215 Blower Performance Curves 1224 Blower Performance Curves 1230 Blower Performance Curves 1236 Blower Performance Curves 1248 Blower Performance Curves 3202 Blower Performance Curves 3204 Blower Performance Curves 3206 Blower Performance Curves 3206 Blower Performance Curves (Metric) 3210 Blower Performance Curves 3210 Blower Performance Curves (Metric) 4006 Blower Performance Curves 4009 Blower Performance Curves 4009 Blowers Performance Curves (Metric) 4009 Blowers Performance Curves (Premium) 4012 Blowers Performance Curves 4012 Blowers erformance Curves (Metric) 5507 Blower Performance Curves 5507 Blower Performance Curves (Metric) 5507 Blower Performance Curves Premium) 5509 Blower Performance Curves 5509 Blower Performance Curves (Metric) 5509 Blower Performance Curves (Premium) 5511 Blower Performance Curves 5511 Blower Performance Curves (Metric) 5511 Blower Performance Curves (Premium) 5514 Blower Performance Curves 5514 Blower Performance Curves (Metric) 5516 Blower Performance Curves 5516 Blower Performance Curves (Metric) 5518 Blower Performance Curves 5518 Blower Performance Curves (Metric) 5520 Blower Performance Curves 5520 Blower Performance Curves (Metric 7010 Blower Performance Curves 7013 Blower Performance Curves 7017 Blower Performance Curves 7021 lower Performance Curves 7026 Blower Performance Curves9012 Blower Performance Curves 9016 Blower Performance Curves 9020 Blower erformance Curves 9027 Blower Performance Curves 3203 Qx Performance Curves 3203 Qx Metric Performance Curves 3205 Qx Performance Curves 3205 Qx Metric Performance Curves 3208 Qx Performance Curves 3208 Qx Metric Performance Curves 4606 Qx Performance Curves 4606 Qx Metric Performance Curves 4610 Qx Performance Curves 4610 Qx Metric Performance Curves 6009 Qx Performance Curves 6009 Qx Metric Performance Curves 6015 Qx Metric Performance Curves Vacuum Boosters 1200 Vacuum Booster Performance Curve 1200_msr_vs_p1 Booster Performance Curves 1200_trc_vs_p1 Booster Performance Curves 1200_vb_hp Booster Performance Curves 1200_vb_ve Booster Performance Curves 3200 Booster Performance Curves 3200_ko Booster Performance Curves 3200_msr_vs_p1 Booster Performance Curves 3200_vb_hp Booster Performance Curves 3200_trc_vs_p1 Booster Performance Curves 3200_vb_ve Booster Performance Curve 4000 Booster Performance Curves 4000_msr_vs_p1 Booster Performance Curves 4000_vb_hp Booster Performance Curves 4000_trc_vs_p1 Booster Performance Curves 4000_vb_ve Booster Performance Curves 5500 Booster Performance Curves 5500_ko Booster Performance Curves 5500_msr_vs_p1 Booster Performance Curves 5500_vb_hp Booster Performance Curves 5500_trc_vs_p1 Booster Performance Curves 5500_vb_ve Booster Performance Curves 7000 Booster Performance Curves 7000_msr_vs_p1 Booster Performance Curves 7000_trc_vs_p1 Booster Performance Curves 7000_vb_hp Booster Performance Curves 7000_vb_ve Booster Performance Curves 9000 Performance Curves 9000_trc_vs_p1 Performance Curves 9000_msr_vs_p1 Performance Curves 9000_vb_hp Performance Curves 9000_vb_ve Performance Curves  Specification Sheets Blower Packages Air & Gas Systems - Repair Brochure Air & Gas Systems - Fabrication Brochure Competitor Competitor Plus Specification Sheet Competitor Plus Specification Sheet (Metric) Competitor GT Specification Sheet Competitor SL Specification Sheet Competitor SL Specification Sheet (Metric) Equalizer Equalizer DF Specification Sheet Lubrication PneuLube™ Oil Specification Sheet PneuLube™ Grease Specification Sheet PD Plus 1200 PD Plus Specification Sheet 3200 PD Plus Specification Sheet 4000 PD Plus Specification Sheet 5500 PD Plus Specification Sheet 7000 PD Plus Specification Sheet 9000 PD Plus Specification Sheet Qx 3200 Qx Specification Sheet 4600 Qx Specification Sheet 6000 Qx Specification Sheet Vacuum Boosters 1200 Vacuum Booster Spec Sheet 3200 Vacuum Booster Spec Sheet 4000 Vacuum Booster Spec Sheet 5500 Vacuum Booster Spec Sheet 7000 Vacuum Booster Spec Sheet 9000 Vacuum Booster Spec Sheet Brochures Air & Gas Systems, Inc Air & Gas Systems - Repair Brochure Air & Gas Systems - Fabrication Brochure AF Liquid Ring Vacuum Pumps Fluid-Vac® Principle Atlantic Fluidics Brochure Liquid Ring Brochure KLRC Liquid Ring Vacuum Pumps Kinney LR Pumps Brochure Rotary Piston Vacuum Pumps Rotary Piston Brochure Vacuum Systems Mechanical Booster Vacuum Systems Brochure   Kit Lists Dry Screw Vacuum Pumps KDP150_ SP_ KIT_085150_0003 KDP330_SP_KIT_085330_0003 KDP400_SP_KIT_085400_0003 KDP800_SP_KIT_085800_0003 KLRC Liquid Ring Vacuum Pumps KLRC100-125_KBA-KFA2_KIT_809980_ 00BM KMBD Vacuum Boosters KMBD200-400_29206 KMBD200-400_29208 KMBD200C-400C_32184 KMBD540-720_29209 KMBD540-720ss_29210 KMBD540C-720C_40119 KMBD540C-720C_pre-1999_40011 KMBD850-2700_29211 KMBD850-2700_29212 KMBD850C-2700C_55272 Rotary Piston Vacuum Pumps KC15_MAJOR_KIT KC15_MAJOR_KIT KC15_PM_KIT KC2-3_MAJOR_KIT KC2-3_MAJOR_KIT KC2-3_PM_KIT KC2-3_PM_KIT KC5-8_MAJOR_KIT KC5-8_MAJOR_KIT KC5-8_PM_KIT KC5-8_PM_KIT KD30_PM_KIT KD50_MAJOR_KIT KDH130-150_PM_KIT KDH130B_MAJOR_KIT KDH130B_PM_KIT KDH130B-131_PM_KIT KS15_MAJOR_KIT KS15_PM_KIT KT120LP_MAJOR_KIT KT120LP_PM_KIT KT1350VFP_MAJOR_KIT KT1350VFP_PM_KIT KT150C_MAJOR_KIT KT150C_PM_KIT KT170LP_50HZ_MAJOR_KIT KT170LP_50HZ_PM_KIT KT170LP_60HZ_MAJOR_KIT KT170LP_60HZ_PM_ KIT KT190LP_50HZ_MAJOR_KIT KT190LP_50HZ_PM_KIT KT190LP_60HZ_MAJOR_KIT KT190LP_60HZ_PM_KIT  KT275LP_MAJOR_KIT KT275LP_PM_KIT KT300C_50HZ_MAJOR_KIT KT300C_50HZ_PM_KIT KT300C_60HZ_MAJOR_KIT KT300C_60HZ_PM_KIT KT300D_50HZ_MAJOR_KIT KT300D_50HZ_PM_KIT KT300D_60HZ_MAJOR_KIT KT300D_60HZ_PM_KIT KT500C_MAJOR_KIT KT500C_PM_KIT KT500D_MAJOR_KIT KT500D_PM_KIT KT505LP_MAJOR_KIT KT505LP_PM_KIT KT840VFP_MAJOR_KIT KT840VFP_PM_KIT KT850C_MAJOR_KIT KT850C_PM_KIT KT850D_MAJOR_KIT KTC21B_MAJOR_KIT KTC21B_PM_KIT KTC225_50HZ_MAJOR_KIT KTC225_60HZ_MAJOR_KIT KTC225_PM_KIT KTC35_MAJOR_KIT KTC35_PM_KIT TC55-60_MAJOR_KIT KTC55-60_PM_KIT KTC55-60-REFRIG_PM_KIT KTC90-112_MAJOR_KIT KTC90-112_PM_KIT Manuals AF Liquid Ring Vacuum Pumps AF Pump Operation & Maintenance Manual Dry Screw Vacuum Pumps SDV Series Dry Vacuum Pumps - Installation Manual KDP Dry Screw Product Manual - 1854 KLRC Liquid Ring Vacuum Pumps KLRC Product Manual KMBD Vacuum Boosters KMBD 200 2700 Product Manual KMBD 240C 2700C 1857-1 Service Manua lKMBD 2900 3600 4500 Product Manual KMBD 4500 10000 Product Manual Rotary Piston Vacuum Pumps KC Series Operation Manual KD Series Operation Manual KDH Series Operation Manual KT Series Product Manual KT 120 LP Product Manua KT Series Operation & Maintenance Manual KTC 21B Product Manual KTC 60,112,225 Product Manual KTLP Series Operation Manual KT-VFP Series Operation Manual Rotary Vane Vacuum Pumps KSV 200 300 Installation Manual KSV 40 65 100 Installation Manual KUV 25 Product Manual - 1856 KVA/KVAH Rotary Vane Manual Vacuum Systems Kinney Booster Systems Manual (English) 1816 Accessory Manuals Kinney Oil Mist Eliminators - 1855 Oil Mist Eliminator Manual - 1855  MSDS Vacuum Pumps and Systems AX OIL - MSDS Halovac Oil - MSDS Kinlube 220 - MSDS Kinseal Sealant - MSDS KV100 Oil - MSDS LR Oil - MSDS LT Oil - MSDS POE Oil - MSDS S 500 Synthetic Oil - MSDS Super X Oil - MSDS Type A Oil - MSDS UCON LB300X Oil - MSDS Parts List AF Liquid Ring Vacuum Pumps A-Series_Part_Numbers_(Bronze) A-Series_Part_Numbers_(CIBF) A-Series_Part_Numbers_(Iron) A-Series_Part_Numbers_(Ni-Resist) A-Series_Part_Numbers_(Stainless)   Specification Sheets  AF Liquid Ring Vacuum Pumps Air & Gas Systems - Repair Brochure Air & Gas Systems - Fabrication Brochure Dry Screw Vacuum Pumps SDV 120 200 Specifications Sheet SDV 320 430 Specifications Sheet SDV 800 Specifications Sheet KDP Dry Screw Vacuum Pump Specification Sheet KLRC Liquid Ring Vacuum Pumps KLRC 40 75 Specification Sheet KLRC 100 125 Specification Sheet KLRC 200 300 Specification Sheet KLRC 525 526 Specification Sheet KLRC 950 951 Specification Sheet KMBD Vacuum Boosters KMBD Specification Sheet KMBD6015 Specification Sheet KMBD-BP Specification Sheet Rotary Piston Vacuum Pumps KC Series Specification Sheet KD Series Specification Sheet KT Series Product Data Sheet KT Series Specifications Sheet KTC Series Specification Sheet KTLP Series Specification Sheet Rotary Vane Vacuum Pumps KVAC 2 Specification Sheet KVAC 33 63 Specifcation Sheet KVAC 5 10 15 21 Specifcation Sheet KVA/KVAH Rotary Vane Vacuum Pumps - Product Data Sheet Vacuum Systems AF OSR System 200-300 Specification Sheet AF OSR System 5-20 AF OSR System 75-130 Specification Sheet CB1685 CB1650 CB1630 CB2085 Specification Sheet CB2415 CB4015 CB4030 Specification Sheet CB7215 CB7230 CB7250 Specification Shee CC Booster Systems Specification Sheet OSR 200-300 System Specification Sheet OSR 5-20 System Specification Sheet OSR 75-130 System Specification Sheet Vacuum Oils LT Oil D250-81 - Data Sheet KV-100 Oil D250-89 - Data Sheet Halovac Oil D250-94 - Data Sheet Ucon Oil D250-98 - Data Sheet Kinlube 220 D250-116 - Data Sheet LR Oil D250-119 - Data Sheet Kinney POE Oil D250-127 - Data Sheet AX Oil D250-137 - Data Sheet S500 D250-139 - Data Sheet";
s[78] = "Landfill Gas Recovery Systems^Landfill_Gas_Recovery.html^Air & Gas Systems, Inc. specializes in the engineering, manufacturing and installation of standard and custom gas compressor packages for Landfill gas recovery. With today's renewable energy tax credits, the incentives have never been better to turn landfill gas into energy. We are a pioneer in the design and fabrication of gas blower and vacuum systems for many environmental applications, from landfill gas recovery to other biogas energy applications. Contact us for a free estimate.LFG Recovery to Energy Process Giving Innovation and Dependability a Whole New Meaning Our engineers, technicians, and mechanics have decades of experience to best provide you with a custom gas recovery solution for your unique landfill specifications and gas composition. Our packages reclaim methane gas from landfills and bio waste plants to scrub the gas, compress it, and then boost into engine generators to produce electricity or boost to boilers to feed gas into plants, or sales lines for utility gas. Let us help you with your landfill gas compression package, contact us for a free estimate.Packaging Capabilities Include: Rotary Lobe Blowers Centrifugal Blowers Rotary Screw Gas Compressors Reciprocating Gas Compressors Sliding Vanes Compressors ASME Code vessels Suction Separators Discharge Separator/ Coalescers Piping to ANSI B31.3 Air to Gas Heat Exchangers Gas to Gas Heat Exchangers Vapor Combusters, Enclosed Flares, & Infrared Burners Chiller Systems utilizing Glycol/Water solutions Complete customized process control through PLC panel Engineering and Design Sulfur Treatment Vessels Check Out a Few of Our Gas Compression Packages in Operation List of Our Certifications: Structural steel welding to AWS D1.1, Piping to ANSI B31.3, welders for piping qualified to ASME Code. Pressure vessels to ASME Code. Electrical per UL, NEC, NFPA and NEMA standards for various area classifications. Nondestructive testing performed per specification, including X-ray, Ultrasonic, Mag. Particle, etc. Performance testing per PTC-9 available Mechanical run testing Hydrostatic testing available Material certification to ANSI standard conformance, available on request OSHA standards for guards, platforms, railings, etc. Noise level testing and noise level guarantees Tax Credits & Current Legislation for Renewable Energy:  LFG Production Tax Credits Section 45 Production Tax Credits Energy Policy Act 2005 Landfill Gas Recovery";
s[79] = "Biogas Recovery Packages^Biogas_Recovery.html^ Biogas Recovery Packages Air & Gas Systems, Inc. specializes in the engineering, manufacturing and installation of standard and custom gas compressor packages for Biogas recovery. With today's renewable energy tax credits, the incentives have never been better to turn biogas into energy. We are a pioneer in the design and fabrication of gas blower and vacuum systems for many environmental applications, from biogas energy to other cogeneration applications. Contact us for a free estimate.Methane & Other Biogas Recovery to Energy Gas Compression Packages Our engineers, technicians, and mechanics have decades of experience to best provide you a custom gas recovery solution for your unique biogas specifications and gas composition. Our packages reclaim methane gas from bio waste plants to scrub the gas, compress it, and then boost into engine generators to produce electricity or boost to boilers to feed gas into plants, or sales lines for utility gas. Let us help you with your Biogas compression package, contact us for a free estimate.Packaging Capabilities Include:Rotary Lobe Blowers Centrifugal Blowers Rotary Screw Gas Compressors Reciprocating Gas Compressors Sliding Vanes Compressors ASME Code vessels Suction Separators Discharge Separator/ Coalescers Piping to ANSI B31.3 Air to Gas Heat Exchangers Gas to Gas Heat Exchangers Vapor Combusters, Enclosed Flares, & Infrared Burners Chiller Systems utilizing Glycol/Water solutions Complete customized process control through PLC panel Engineering and Design Sulfur Treatment Vessels Check Out a Few of Our Biogas Compression Packages in Operation:List of Our Certifications: Structural steel welding to AWS D1.1, Piping to ANSI B31.3, welders for piping qualified to ASME Code.  Pressure vessels to ASME Code.  Electrical per UL, NEC, NFPA and NEMA standards for various area classifications. Nondestructive testing performed per specification, including X-ray, Ultrasonic, Mag. Particle, etc. Performance testing per PTC-9 available Mechanical run testing Hydrostatic testing available Material certification to ANSI standard conformance, available on request OSHA standards for guards, platforms, railings, etc. Noise level testing and noise level guarantees Tax Credits & Current Legislation for Renewable Energy: LFG Production Tax Credits Section 45 Production Tax Credits Energy Policy Act 2005 Biogas Recovery";
s[80] = "Vapor Recovery Vacuum Packages^Vapor_Recovery.html^Air & Gas Systems, Inc. also specializes in the engineering, manufacturing and installation of standard and custom gas vacuum packages for vapor recovery. Our engineers, technicians, and mechanics have decades of experience in providing gas vacuum packages for vapor recovery applications that comply with today's regulations and standards. Let us help you with your unique pneumatic blower application. Contact us for a free estimate.Chemical Plant with Vapor Recovery Packages Long-Lasting Vacuum Packages Our gas vacuum packages are used in many chemical process industries to remove and recover vapor from storage tanks, petrochemical plants, barges in shipyards and many other processes. We can design and build your vapor recovery package to handle any gas composition, even environmentally hazardous gas. Let us help design your vapor recovery package, contact us for a free estimate.Check Out a Few of Our Vapor Recovery Packages in Operation: List of Our Certifications: Structural steel welding to AWS D1.1, Piping to ANSI B31.3, welders for piping qualified to ASME Code.Pressure vessels to ASME Code. Electrical per UL, NEC, NFPA and NEMA standards for various area classifications. Nondestructive testing performed per specification, including X-ray, Ultrasonic, Mag. Particle, etc.Performance testing per PTC-9 available Mechanical run testing Hydrostatic testing available Material certification to ANSI standard conformance, available on request OSHA standards for guards, platforms, railings, etc. Noise level testing and noise level guarantees Vapor Recovery";
s[81] = "Wastewater Treatment Blower Packages^Wastewater_Treatment.html^Air & Gas Systems, Inc. also specializes in the engineering, manufacturing and installation of standard and custom air blower packages for wastewater treatment. Our engineers, technicians, and mechanics have decades of experience in providing air blower aeration packages for wastewater treatment plants. Let us help you with your unique wastewater blower application. Contact us for a free estimate Wastewater Treatment Plant Long-Lasting Blower Packages Our blower packages supply air, feeding oxygen to the bacteria which must degrade the organic matter in the wastewater treatment process. The blower must overcome the resistance of the water height and diffuser/piping losses. Our blower packages have the ability to vary the flow while keeping a constant pressure. Let us help design your wastewater blower package, contact us for a free estimate.Our Wastewater Treatment Blower Packages Include: Heavy-duty blower base - includes adjustable motor mount Totally enclosed drive guard - ensures safety and allows visibility for belt inspection Industry proven Tuthill Blower - dynamically balanced & tested with factory warranty Presure relief valves - ensure proper pressure and blower lifespan Industry proven NEMA motor - standard on every blower package Easy-to-read guages - permits easy monitoring of pressure and blower condition Inlet filter silencer - reduces sound emissions and proper air filtration for the blower Inlet and discharge silencers - reduce sound emissions while allowing proper flow Noise enclosure - ensures below 80 Dba sound emission Check Out a Few of Our Blower Packages in Operation: Need Below 80 Dba Noise Control? No Problem.We are capable of designing and manufacturing custom noise enclosures for your blower packages as well. Noise control is a necessity for wastewater treatment blower packages in residential areas. Contact us to help you with your blower packages and for a free estimate.List of Our Certifications: Structural steel welding to AWS D1.1, Piping to ANSI B31.3, welders for piping qualified to ASME Code. Pressure vessels to ASME Code. Electrical per UL, NEC, NFPA and NEMA standards for various area classifications. Nondestructive testing performed per specification, including X-ray, Ultrasonic, Mag. Particle, etc. Performance testing per PTC-9 available Mechanical run testing Hydrostatic testing available Material certification to ANSI standard conformance, available on request OSHA standards for guards, platforms, railings, etc. Noise level testing and noise level guarantees Wastewater Treatment";
s[82] = "Pneumatic Conveying Blower Packages^Pneumatic_Conveying.html^ Pneumatic Conveying Blower Packages Air & Gas Systems, Inc. also specializes in the engineering, manufacturing and installation of standard and custom air blower packages for pneumatic conveying. Our engineers, technicians, and mechanics have decades of experience in providing air blower packages for pneumatic conveying applications. Let us help you with your unique pneumatic blower application. Contact us for a free estimate Pneumatic Conveying Plant Diagram  Long-Lasting Blower PackagesPneumatic conveying systems come in all ranges in sizes, and convey many different types of product, from pellets and powders to granular materials. Our blower packages are engineered and calibrated so that they will properly respond to your specific pneumatic application, and deliver the proper flow for your pneumatic process. It is very important to properly size the blower for maximum system efficiency, we will give you an accurate recomendation. Let us help design your pneumatic conveying blower package, contact us for a free estimate.Our Pneumatic Blower Packages Include:Heavy-duty blower base - includes adjustable motor mount Totally enclosed drive guard - ensures safety and allows visibility for belt inspection Industry proven Tuthill Blower - dynamically balanced & tested with factory warranty Flexible expansion connections - allowing expansion at inlet/discharge of the blower Presure relief valves - ensure proper pressure and blower lifespan Industry proven NEMA motor - standard on every blower package Easy-to-read guages - permits easy monitoring of pressure and blower condition Inlet filter silencer - reduces sound emissions and proper air filtration for the blower Inlet and discharge silencers - reduce sound emissions while allowing proper flow Check Out a Few of Our Blower Packages in Operation List of Our Certifications: tructural steel welding to AWS D1.1, Piping to ANSI B31.3, welders for piping qualified to ASME Code.  Pressure vessels to ASME Code.  Electrical per UL, NEC, NFPA and NEMA standards for various area classifications.Nondestructive testing performed per specification, including X-ray, Ultrasonic, Mag. Particle, etc. Performance testing per PTC-9 available Mechanical run testing Hydrostatic testing available Material certification to ANSI standard conformance, available on request OSHA standards for guards, platforms, railings, etc. Noise level testing and noise level guarantees Pneumatic conveying";
s[83] = "PneuLube™ Lithium Complex Grease^PneuLube_grease.html^PneuLube™ Lithium Complex Grease is a multipurpose grease that is shear stable with exceptional extreme pressure characteristics. PneuLube Lithium Complex Grease outperforms conventional greases and satisfies nearly all grease requirements found in industrial applications.The special formulation of PneuLube Lithium Complex Grease combines selected base stocks with Lithium Complex thickeners and sepcial additives to resist bleeding and seperation to ensure a long lasting lubricant.Applications Compatibility Documents Blower bearings Electric motor bearings Low & high speed journal bearings Roller & needle bearings Shaker & crusher bearings Steel mill roler bearings Paper machines, wet-end and dryer sections Water pumps, wheel bearings Ball joints, universal joints Fifth wheels Construction & agriculture equipment PnueLube™ is compatible with essentially all seal materials, elastomers and paints, including:Buna-N acrylonitrile Neoprene Viton® Teflon® Polyethylene Polyurethane ether Flourocarbon Polysulfate Polyacrylate Ethylene acrylic Epoxy Plastisol PVC Acrylic paint Lacquer PneuLube™ is also fully compatible with hydrogen service applications. PneuLube does not thicken or congeal in the presence of hydrogen.PneuLube Grease Specification Sheet PneuLube Grease";
s[84] = "Liquid Ring Vacuum Systems^AF_Liquid_Ring_Vacuum_Systems.html^Liquid Ring Vacuum Systems are process oriented for a wide variety of applications from medical/dental to plastics extrusion to environmental remediation. These systems are also well suited to chemical and petrochemical as well as pharmaceutical applications. Liquid ring vacuum systems are air or liquid cooled, and a variety of sealant liquids are available. AF Liquid Ring Vacuum Systems KLRC Liquid Ring Vacuum Systems";
s[85] = "Booster & Piston Vacuum Systems^Booster_Piston_Vacuum_Systems.html^Booster and piston vacuum systems combine the features of Kinney KT™ Pumps and Integral Drive (C-fac) Boosters into a space efficient package capable of continuous high vacuum. Flows to 10000 CFM (17000 m³/h), ultimate pressures to 0.2 micron (0.03 Pa). Also, designed to provide very fast pumpdown and high pumping speed.CB Compact Vacuum Systems CC Close-Coupled Vacuum Systems";
s[86] = "CB Compact Vacuum Systems^CB_Compact_Vacuum_Systems.html^Kinney CB Compact Booster Systems combine the features of Kinney KT™ Pumps and Integral Drive (C-face) Boosters into a space efficient package capable of continuous high pumping capacity down to 10 microns (0.13 Pa). They are suitable for use in vacuum furnace, vacuum coating, sputtering, space simulation, and other applications. Features Applications Warranty Documents High pumping capacity down to 10 microns Increased flow to power ratio as compared to equivalent sized pump alone Flow range: 240 - 2000 CFM (400 - 3400 m³/h) Ultimate pressure: 0.2 Microns (McLeod Gauge) Compact footprint design Simple installation, no special preparations required Quiet, vibration-free operation Integral drive booster Booster pressure cut-in switch Temperature switch Vacuum Packaging Vacuum Furnaces Vacuum Coating Sputtering Space Simulation Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KT Series Operation & Maintenance Manual 1843-2 CB2415 CB4015 CB4030 Specification Sheet CB7215 CB7230 CB7250 Specification Sheet CB1685 CB1650 CB1630 CB2085 Specification Sheet CC Booster Systems Specification Sheet";
s[87] = "CC Closed-Couple Vacuum Systems^CC_Close_Coupled_Vacuum_Systems.html^Kinney CC Close-Coupled Mechanical Booster Vacuum Pump Systems are designed to provide very fast pumpdown and high pumping speed. A single motor drives both the pump and the booster so both start at atmospheric pressure.These compact systems occupy very little floor space and are easily installed.CC Systems are rated to ultimate pressure capability of 0.2 micron (.026 Pa)Features Applications Warranty Documents Both pump and booster start simultaneously for very fast pumpdown Increased flow to power ratio as compared to equivalent sized pump alone Flow range: 300 - 1200 CFM (510 - 2040 m³/h) Ultimate pressure: 0.2 Microns (McLeod Gauge) Compact footprint design Simple installation, no special preparations required Quiet, vibration-free operation Temperature switch Optional mechanical seals in booster for applications where seconds count in cycle and pumpdown time Vacuum Packaging Vacuum Furnaces Vacuum Coating Sputtering Space Simulation Every Tuthill Vacuum Pump is backed by the Tuthill Vacuum & Blower Systems limited warranty Type of Application Atmospheric Air or Process Air without Liquids Present Process Gases Other than Air, or Any Liquid Injected Application 24 months from date of shipment, or 18 months after initial startup date, whichever occurs first. 18 months from date of shipment, or 12 months after initial startup date, whichever occurs first KT Series Operation & Maintenance Manual 1843-2 Kinney Booster Systems Manual (English) 1816 KMBD 200-2700 Booster Manual 1814-2 CC Booster Systems Specification Sheet";
s[88] = "Liquid Ring Vacuum Systems^Liquid_Ring_Vacuum_Systems.html^Liquid Ring Vacuum Systems are process oriented for a wide variety of applications from medical/dental to plastics extrusion to environmental remediation. These systems are also well suited to chemical and petrochemical as well as pharmaceutical applications. Liquid ring vacuum systems are air or liquid cooled, and a variety of sealant liquids are available.AF Liquid Ring Vacuum Systems KLRC Liquid Ring Vacuum Systems";
s[89] = "KLRC Liquid Ring Vacuum Systems^KLRC_Liquid_Ring_Vacuum_Systems.html^AF Liquid Ring Vacuum Systems KLRC Liquid Ring Vacuum Systems";


// ---------- end of script properties and sites ----------


var cookies = document.cookie;
var dval=cookies.split(";");
var dval1=dval[4];
var dval=dval1.split("=");
var d=dval[1];
d = unescape(d);

var od = d;
var m = 0;
if (d.charAt(0) == '"' && d.charAt(d.length - 1) == '"') 
{
	m = 1;
}

var r = new Array();
var co = 0;


if (m == 0)
{
	var woin = new Array();

	var w = d.split(" ");

	for (var a = 0; a < w.length; a++)
	{
		woin[a] = 0;
		if (w[a].charAt(0) == '-') 
		{
			woin[a] = 1;
		}
	}
	for (var a = 0; a < w.length; a++) {
		w[a] = w[a].replace(/^\-|^\+/gi, "");
	}
	a = 0;
	for (var c = 0; c < s.length; c++) 
	{
		pa = 0;
		nh = 0;
		for (var i = 0; i < woin.length; i++) {
			if (woin[i] == 0) 
			{
				nh++;
				var pat = new RegExp(w[i], "i");
				var rn = s[c].search(pat);
				if (rn >= 0) 
				{
					pa++;
				} 
				else 
				{
					pa = 0;
				}
			}
			if (woin[i] == 1) {
				var pat = new RegExp(w[i], "i");
				var rn = s[c].search(pat);
				if (rn >= 0) {
					pa = 0;
				}
			}
		}
		if (pa == nh) {
			r[a] = s[c];
			a++;
		}
	}
	co = a;
}

if (m == 1) {
	d = d.replace(/"/gi, "");
	var a = 0;
	var pat = new RegExp(d, "i");
	for (var c = 0; c < s.length; c++) {
		var rn = s[c].search(pat);
		if (rn >= 0) {
			r[a] = s[c];
			a++;
		}
	}
	co = a;

}


function return_query() {
	document.jse_Form.d.value = od;
}

function num_jse() {
	document.write(co);
}

function out_jse() {
	if (co == 0) {
		document.write('Your search did not match any documents.<p>Make sure all keywords are spelt correctly.<br>Try different or more general keywords.');
		return;
	}
	for (var a = 0; a < r.length; a++) {
		var os = r[a].split("^");
		if (bold == 1 && m == 1) {
			var br = "<b>" + d + "</b>";
			os[2] = os[2].replace(pat, br);
		}
		if (include_num == 1) 
		{
			
		document.write(a + 1, '. <a href="../', os[1], '">', os[0], '</a><br><a href="../', os[1], '">http://www.yezukevich.com/AirGasTech/', os[1] ,'</a><p>');
		} else {
			
			document.write('<a href="../', os[1], '">', os[0], '</a><br><a href="../', os[1], '">http://www.yezukevich.com/AirGasTech/', os[1] ,'</a><p>');
		}
	}

}